Marktpreise für Commodities in Zentral- und Osteuropa

Hier finden Sie jede Woche die Marktpreise für verschiedene Typen von LDPE, HDPE und PP, die unser Partner myCEPPI in den Ländern Mittel- und Osteuropas regelmäßig erhebt. plasticker veröffentlicht wöchentlich Preisdaten mit einer Verzögerung von vier Wochen.

Wenn Sie an aktuelleren Informationen interessiert sind, klicken Sie bitte hier für einen kostenlosen Test von "myCEPPI’s Weekly Commodity Price Report"!

Preise für KW 50/2018
(veröffenlicht von myCEPPI am 17.12.2018)

Typ Preis Diff. zur Vorwoche
PE-HD Blasware 1.153 €/t 0 €/t
PE-HD Folienware 1.153 €/t 0 €/t
PE-HD Spritzguss 1.152 €/t 0 €/t
PE-HD Rohrware (100) 1.345 €/t 0 €/t
PE-LD Folienware 1.073 €/t 0 €/t
PE-LD 1.057 €/t 0 €/t
LLDPE C4 1.107 €/t 0 €/t
PP-Copo Spritzguss 1.273 €/t 0 €/t
PP-Homo Faser 1.205 €/t -1 €/t
PP-Homo Spritzguss 1.210 €/t 0 €/t
PPR 1.335 €/t 0 €/t
GPPS 1.226 €/t 0 €/t
HIPS 1.245 €/t 0 €/t
EPS 1.315 €/t 0 €/t

17.12.2018, nur in Englisch verfügbar

Low, end-of-the-year demand, minor price erosion

The following factors influenced “commodity” polymer prices and price expectations last week:

  • BRENT oil price 60.28 USD/barrel, decreasing prices compared to last week,
  • EUR/USD: 1.1301, EURO getting weaker
  • NAPHTHA: 474.23 USD/t, decreasing prices
  • low demand in case of all products,
  • dropping spot monomer olefin and increasing SM prices
    • Ethylene (C2) spot price (December 14 FDNWE): 770 EUR/t,
    • Propylene (C3) spot price (December 14 FDNWE): 870 EUR/t,
    • Styrene monomer (SM) spot price (December 14 FOB Rotterdam): 955 USD/ton

For the time being oil price is still low and the price of NAPHTHA has dropped slightly. As a result of the reduction of oil production prices will expectedly start rising again. But the spot price of olefin monomer grades has slightly dropped further. Demand came to be much weaker last week, in spite of the low prices there were just a few buyers. The uncertainty linked to next year seems to retain converters from major purchases. Polyolefin producers reduced their prices in a disciplined way, almost unanimously by 50-70 Euro. In this way, by the end of the year price ranges came to be more consistent. For the time being no major producer prepares for clearance sale and price reduction at the end of the year. Though for the time being, due to the cheap oil integrated margins are very attractive for polymer producers with integrated refinery. In this way, even in case of a minor price cut by 20-30 Euro they could still make reasonable profits. We expect a silent end of the year and a slow start next year. Most polymer producers will probably announce their prices as late as on about the 7th January.

In case of SM spot prices have started climbing, prices increased by 20 USD within one week. This is probably a sign for new upward price tendencies. During the next 2 weeks ahead until Xmas still many things might happen. With the exception of cheaper GPPS (1,220 €) there is almost no demand. The weather getting more and more wintery has almost cut off EPS demand as well, and the new EU regulation has a heavy impact on HIPS demand.


Polyolefin grades

Typical LDPE prices were in a range of 1,020-1,120 €/t last week. Did not change compared to last week. Demand is low, in line with the season. And keeps dropping further. it is almost impossible to sell at prices higher than 1,120 €. In this way traders who have dead inventories from previous months are in trouble. A minor end-of-the-year price reduction by 10-15 € is possible until the end of December, but the demand is not expected to liven up significantly because of this.

HDPE prices are surprisingly consistent. There is no major difference in the prices of local producers. In Central Europe the typical prices were in a range of 1,100-1,210 €/t last week. HDPE IM prices are in a range of 1,010-1,180 € and HDPE Film and BM prices are in a range of 1,120-1,210 €. Demand is low.

In December the typical price range of HDPE (100) is 1,270-1,340 €/t. Demand is low. For the time being converters do not consider major pre-purchases at the end of the year.

The typical LLDPE C4 price range was 1,050 - 1,140 €/t. Because of the USD getting stronger a major price drop similar to that of other polyolefin grades is not probable. Demand is getting weaker continuously.

mLLDPE prices were in a range of 1,220-1,380 €/t last week. Demand is low.

PPH prices were in a range of 1,150-1,280 €/t last week. Prices did not drop. Demand is good, cheaper grades from Romania and Serbia sell very well. CE PPH raffia prices were in a range of 1,150-1,210 €/t. The price range of non-special PPM IM products with medium melt index was 1,150-1,240 €/t. The prices of products with high melt index were in a range of 1,210-1,280 €/t last week. Prices are stable. They are also expected to remain stable until the end of the year.

Typical prices of PPC grades were in a range of 1,240-1,340 €/t in Central-Europe last week. Polymer producers did not reduce their prices to the same extent, yet the price range remained unchanged. Demand is good, first of all in the price category below 1,300 €. On this price level it is already reasonable to buy, even in advance.

The PPR price range was 1,280-1,400 €/t, depending on the grade, producer and application area last week. Demand is low.

The prices to be expected during the first week of December are presented in the table below (full truck load 20-22.5 t):
Grade name Typical polymer price ranges in the second week of December, 2018, Central Europe (€/ton)
HDPE blow molding 1,110-1,220
HDPE film 1,120-1,220
HDPE injection molding 1,100-1,180
HDPE pipe (100) 1,280-1,350
LDPE film 1,020-1,120
LDPE general purpose 1,020-1,120
LLDPE C4 1,040-1,140
PP co-polymer injection molding 1,240-1,380
PP homo-polymer fiber 1,150-1,220
PP homo-polymer injection molding 1,170-1,280
PPR 1,280-1,400
GPPS 1,200-1,300
HIPS 1,210-1,320
EPS 1,260-1,370


Polystyrene grades

Last week in Central Europe EPS prices were in a range of 1,260-1,370 €/t. Demand came almost to a halt. Due to the end of the year. The insulation material season will restart as late as March, April. In this way only large companies continuously producing for the warehouse buy in advance.

The demand for GPPS and HIPS dropped as well. Grades produced in the EU are not available at all. Import from outside of Europe is expensive. The typical GPPS price range was 1,200-1,300 €. HIPS prices were in a range of 1,210-1,320 €.

Contact to myCEPPI:

László Büdy
laszlo.budy@myceppi.com

www.myceppi.com

About MyCeppi

"myCEPPI – a new voice and new approach on the plastics industry consulting and business intelligence market. With our expert advice, you can get a detailed, up-to-date and tailor-made picture of the Central and Eastern European plastics market and its main trends, data, news and key players.

Our services rely on our personal, regular and in-depth relations with players of the CEE plastics industry.

Each month, we conduct hundreds of interviews and telephone calls with industry players – plastics converters, traders, resin manufacturers – and we are also present at the biggest regional plastics trade fairs and conferences.

The information we collect in the process forms the basis of our weekly price report and market analysis; it feeds into our plastics industry company database; and it serves as the starting point for our multi-level consulting services for companies that need help sizing up, entering or navigating a specific market.

Our experts possess decades of plastics industry experience, as well as fluency in several regional languages.

Our partners include
  • key players of the CEE plastics industry – the resin
  • master-batch and machinery manufacturers
  • distributors, and plastics converters that shape market trends across the region.

We would be happy to welcome you as a partner; please do not hesitate to contact us!"

(László Büdy, Managing director, head of consulting)

Ältere Notierungen:

2019:
2018: 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
2017: 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 25 24 23 22 21 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
2016: 51 50 49 48 47

Woche 14/2018

PE-HD Blasware 1.109 €/t
PE-HD Folienware 1.110 €/t
PE-HD Spritzguss 1.111 €/t
PE-HD Rohrware (100) 1.400 €/t
PE-LD Folienware 1.159 €/t
PE-LD 1.166 €/t
LLDPE C4 1.130 €/t
PP-Copo Spritzguss 1.260 €/t
PP-Homo Faser 1.151 €/t
PP-Homo Spritzguss 1.162 €/t
PPR 1.301 €/t
GPPS 1.478 €/t
HIPS 1.598 €/t
EPS 1.730 €/t


Premium-Partner
Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PS Granulat [€/kg]
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

Jetzt anmelden!

Jetzt Kosten im Einkauf senken!
Neuware-Restmengen, Regranulate oder Mahlgüter für Ihre Produktion erhalten Sie in der Rohstoffbörse.

Neue und gebrauchte Maschinen & Anlagen finden Sie in der großen Maschinenbörse.

Kostenfreie Nutzung aller Börsen! Registrieren Sie sich jetzt!

Neue Fachbücher
Micro Injection Molding

Das Buch "Micro Injection Molding" widmet sich dem Mikrospritzgießen und den Herausforderungen bei der Verarbeitung von Polymeren auf kleinstem Raum. [mehr]

Deutsches Kunststoff Museum
Das Exponat des Tages

Handelsvertreter-Börse
Benötigen Sie für Ihre Produkte und Dienstleistungen Vertriebspartner im In- und Ausland?
Oder können Sie selbst eine Vertretung anbieten?
Hier finden Sie das optimale Umfeld!

4 Anfragen von Unternehmen
1 Anfragen von Handelsvertretern

Eigene Anfragen kostenfrei inserieren