Marktpreise für Commodities in Zentral- und Osteuropa

Hier finden Sie jede Woche die Marktpreise für verschiedene Typen von LDPE, HDPE und PP, die unser Partner myCEPPI in den Ländern Mittel- und Osteuropas regelmäßig erhebt. plasticker veröffentlicht wöchentlich Preisdaten mit einer Verzögerung von zwei Wochen.

Wenn Sie an aktuelleren Informationen interessiert sind, klicken Sie bitte hier für einen kostenlosen Test von "myCEPPI’s Weekly Commodity Price Report"!

Preise für KW 27/2017
(veröffenlicht von myCEPPI am 03.07.2017)

Typ Preis Diff. zur Vorwoche
PE-HD Blasware 1.178 €/t - €/t
PE-HD Folienware 1.171 €/t - €/t
PE-HD Spritzguss 1.157 €/t - €/t
PE-HD Rohrware (100) 1.313 €/t - €/t
PE-LD Folienware 1.240 €/t - €/t
PE-LD 1.247 €/t - €/t
LLDPE C4 1.193 €/t - €/t
PP-Copo Spritzguss 1.241 €/t - €/t
PP-Homo Faser 1.131 €/t - €/t
PP-Homo Spritzguss 1.143 €/t - €/t
PPR 1.272 €/t - €/t
GPPS 1.315 €/t - €/t
HIPS 1.400 €/t - €/t
EPS 1.330 €/t - €/t

03.07.2017, nur in Englisch verfügbar

Polyolefin price correction in July

The following factors influenced “commodity” polymer prices and price expectations last week:

  • balanced supply,
  • low demand,
  • BRENT oil price 47.92 USD, tendency of dropping prices
  • EUR getting stronger, EUR/USD exchange rate permanently close to 1.14
  • Monomer (C2) and propylene monomer (C3) price reduction by 50 €.

In detail

The 50 € price drop surprised the market. Last week traders have already forecast a dynamic demand for July. They were of opinion that purchases would start as early as in July, as polymer prices have dropped to a level not seen for a long time. In advance market players calculated with a monomer price drop by 20-30 €, the reduction by 50 € is a surprise.

The price drop by 20-30 € happened as early as June both in case of PE and PP. The question is whether there is going to be another drop by 20 €. Our answer is: there will be some producers, who will do that, others won’t.

The monomer price drop by 50 € has also one absolute advantage. This allows producers with prices stuck on high level to bring them back to the level of competitors. In this way we can anticipate that on markets with high prices (e.g. in Hungary) there will be a major price correction, reduction both in case of PP and PE.

The extent of the styrene monomer price change was not known at the time when our report was written, it is also hard to forecast it, both minor decrease and slight increase are possible. The PS market is still balanced. This week the July price of SM came into the focus of interest.

Polyolefin grades

In case of LDPE the price ranges were unchanged, the market is already waiting for the price ranges to hit bottom. The lowest prices remained within the still very broad range of 1,130-1,220 €. The price range for medium-sized buyers is 1,230-1,270 €. Here there are also sufficient quantities of goods available. In case of the July prices a price drop by 20-30 € is anticipated. This can be different, depending on the buyer and producer concerned, the price drop by 50 € allows to pull the two extreme values of the price ranges together as we have indicated in our forecasts.

Low HDPE demand continued and it is not expected to increase in July either. On the average we anticipate a price decrease by 30-50 € and the two extreme values of the price range getting closer. It is possible that some prices of Serbian producers will be below 1,000 €.

The pipe market is dynamic, there is season for those products. We do not expect major price drop, prices will be reduced by an average 25-45 €.

LLDPE C4 supply is still low, but the product is absolutely following monomer prices, thus we anticipate a price drop by 40-60 €, the new price range will be 1,100-1,150 €. The reason is in particular that due to the € getting stronger an increasing quantity of imported goods arrives in Central-Europe as well.

PPH demand is consistent. The price range of simple grades is still 1,050-1,100 €. Unfortunately the monomer price reduction by 50 € at the southern producers of the region “pushes” prices below 1,000 €. Such a thing did not happen for a long time. In case of PPH the absolute necessity of a price correction exceeding monomer prices is palpable in case of many producers. In this way prices will get into balance slowly, by the middle of the month only.

In case of PPC we anticipate a price drop by 40-60 €. The latter will be the price correction of prices sticking on high price level. Large buyers can buy in a price range of 1,140-1,180, medium-sized ones in a range of 1,190-1,220 €. Because of the expected correction it will take time for prices to get balanced.

In case of PPR we anticipate no surprises, following monomer prices is the probable scenario. Depending on the grade, the new prices will be in a range of 1,150-1,270 €.

The prices of the last week and the producer price ranges expected for early July are presented in the table below (full truck load 20-22.5 t):
Grade name Typical polymer price ranges in the last week of June, 2017, Central Europe (€/ton)Expected polymer price ranges in the first week of July, 2017, Central Europe (€/ton)
HDPE blow molding 1,080-1,2001,020-1,150
HDPE film 1,080-1,2001,000-1,150
HDPE injection molding 1,050-1,190970-1,160
HDPE pipe (100) 1,270-1,3501,225-1,300
LDPE film 1,130-1,2701,100-1,210
LDPE general purpose 1,130-1,2701,100-1,210
LLDPE C4 1,150-1,2001,100-1,150
PP co-polymer injection molding 1,180-1,2701,140-1,200
PP homo-polymer fiber 1,050-1,150970-1,160
PP homo-polymer injection molding 1,060-1,200990-1,150
PPR 1,200-1,3101,160-1,250
GPPS 1,250-1,320n/a
HIPS 1,390-1,480n/a
EPS 1,320-1,400n/a

Polystyrene grades

The styrene monomer price is not yet known. Market players, buyers do not anticipate significant price changes in July. For the time being even the direction is a question mark, as the SM price underwent a downward correction, but PS prices from European source show an increase.

The main season for EPS will start in July, the ideal thing would be a slightly increasing SM price. In that case major disturbances on the market could be avoided. According to the opinion of market players an increase by 20-30 € would be ideal, and this price would also follow the increased demand for EPS. The ideal price range would be 1,340-1,420 €.

GPPS demand is good, supply is broad. There is a strong, increasing import supply from Iran, Saudi-Arabia, Egypt and Russia alike. This means that local producers have to get adapted to import prices that are getting cheaper and cheaper due to the strong €. The market is under pressure to reduce prices, but the price of SM will determine the direction. At any rate it is sure that in case of increasing SM it will be difficult to enforce price increase.

In case of HIPS demand is good and supply is stable. We experienced no change compared to last week. The price change of July will absolutely be following monomer prices.

Contact to myCEPPI:

László Büdy

About MyCeppi

"myCEPPI – a new voice and new approach on the plastics industry consulting and business intelligence market. With our expert advice, you can get a detailed, up-to-date and tailor-made picture of the Central and Eastern European plastics market and its main trends, data, news and key players.

Our services rely on our personal, regular and in-depth relations with players of the CEE plastics industry.

Each month, we conduct hundreds of interviews and telephone calls with industry players – plastics converters, traders, resin manufacturers – and we are also present at the biggest regional plastics trade fairs and conferences.

The information we collect in the process forms the basis of our weekly price report and market analysis; it feeds into our plastics industry company database; and it serves as the starting point for our multi-level consulting services for companies that need help sizing up, entering or navigating a specific market.

Our experts possess decades of plastics industry experience, as well as fluency in several regional languages.

Our partners include
  • key players of the CEE plastics industry – the resin
  • master-batch and machinery manufacturers
  • distributors, and plastics converters that shape market trends across the region.

We would be happy to welcome you as a partner; please do not hesitate to contact us!"

(László Büdy, Managing director, head of consulting)

Ältere Notierungen:

2017:25 24 23 22 21 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
2016: 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2
2015: 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26

Woche 32/2016

PE-HD Blasware 1.211 €/t
PE-HD Folienware 1.209 €/t
PE-HD Spritzguss 1.218 €/t
PE-HD Rohrware (100) 1.298 €/t
PE-LD Folienware 1.232 €/t
PE-LD 1.231 €/t
PP-Copo Spritzguss 1.095 €/t
PP-Homo Faser 1.009 €/t
PP-Homo Spritzguss 1.013 €/t
PPR 1.193 €/t
GPPS 1.210 €/t
HIPS 1.218 €/t
EPS 1.263 €/t

Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PVC-w Mahlgut [€/kg]
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

Jetzt anmelden!

Jetzt Kosten im Einkauf senken!
Neuware-Restmengen, Regranulate oder Mahlgüter für Ihre Produktion erhalten Sie in der Rohstoffbörse.

Neue und gebrauchte Maschinen & Anlagen finden Sie in der großen Maschinenbörse.

Kostenfreie Nutzung aller Börsen! Registrieren Sie sich jetzt!

Die neuesten Stellenangebote
Neue Fachbücher
Einführung in die Kunststoffprüfung – Prüfmethoden und Anwendungen

Das Buch „Einführung in die Kunststoffprüfung – Prüfmethoden und Anwendungen“ von Prof. Dr.-Ing. Achim Frick und Dr. [mehr]

Deutsches Kunststoff Museum
Das Exponat des Tages

Benötigen Sie für Ihre Produkte und Dienstleistungen Vertriebspartner im In- und Ausland?
Oder können Sie selbst eine Vertretung anbieten?
Hier finden Sie das optimale Umfeld!

5 Anfragen von Unternehmen
1 Anfragen von Handelsvertretern

Eigene Anfragen kostenfrei inserieren