Die Suche nach "mm" in Technologie-Transfer brachte 343 Treffer.

1 bis 15 von 343 News « ‹12345›»
zurück zur Suche
Shaft for small positioner made of advanced materials required
12.11.2018 - A German multinational company is looking for a partner who can develop and/or manufacture a shaft for a small positioner. So far the shaft has been made of stainless steel but now the company looks for a replacement material (e.g. plasitics with steel fibre) that has basically the same features as...

Anzeige

Wozu dient eine Niveau-Regulierung im Sammelbehälter bei Loss-in-Weight-Dosiersystemen?
Um den Durchsatz des Dosiersystems an den Durchsatz des Extruders anzupassen, gibt es zwei gebräuchliche Methoden. Meistens wird ein Signal des Extruders, das linear zur Extruderdrehzahl ist, dazu verwendet.
Thermal spraying technology for applying metal coatings on polymer substrate
05.07.2018 - Belarus research institute developed a technique which allows metallizing of thin polymer substrates by thermal spraying. The resulting adhesion tensile strength is 1.5-2 times higher than by arc spraying and metal plating correspondingly. It can be used to protect unmanned vehicles from electromagnetic...
Cost saving surface pretreatment technology for optimizing gluing, coating, imprinting or painting of plastic parts and other components
01.06.2018 - An Austrian SME developed a new atmospheric cold plasma activation technology for synthetic surfaces. Compared to similar systems it saves operating costs and 30% investment costs, is easier to install in existing productions and suitable for complex surfaces. Nearly all materials (plastics, metals,...
New solution offered for welding, heating or bending plastic parts such as hoses and tubes
17.05.2018 - German company has developed a high-frequency generator with a matching network that can be used for welding plastic parts like hoses, lids or bags in a fast way. This innovative technology is characterized by being able to heat the plastic parts without heating its content. A manufacturer of relevant...
H2020 M-ERA NET call 2018 - Innovative technology for production of high-strength composite roadside barriers – partners are sought from any organisation eligible to participate in the call and able to perform tasks described in the summary
30.04.2018 - A project proposal for M-ERA.NET Call is under preparation. Objective of the project is to develop production technology for thermoplastic composite roadside barriers, progressing from TRL2 to at least TRL4. The design and manufacture technology of barriers will be worked out by the research institute...
Italian solution provider in technical polymer products is looking for end-user clients
24.04.2018 - An Italian medium-sized company located in North-East Italy, with a unique know-how in the production of technical polymer products, is looking for end-user companies in Germany (commercial agreement with technical assistance). The company is an international leading manufacturer of precision engineered...
Looking for new cost-effective and scalable sorting processes which are able to sort a mix of plastics into separate types of plastic
20.04.2018 - A Dutch subsidiary of a multinational company is active in water and waste management. Their current waste separation process is not profitable to do additional sorting on the residual fraction of mixed plastics. To further improve their recycling achievements, the company is looking for new solutions...
Polyurethanes: New 3D-Modelling and Tooling Techniques
08.02.2018 - A revolutionary 3D-modelling and tooling technology has been developed by an Austrian SME. This technology is used to produce models from polyurethanes in a close contour casting process. By providing close contour casts, this company’s customers save up to 30% in labor costs and up to 40% in material...
UK SME offers solvent free low temperature cost effective continuous process for pharmaceutical blister packs and other related packaging
15.01.2018 - A UK based SME has developed a new manufacturing process for flexible packaging materials, including blister foil. The process uses no solvents, is low temperature and offers cost reductions over existing packaging technologies. The company is looking for an industrial partner who may be interested...
Technology for low cost manufacturing of singly and doubly curved composite and plastic panels without a mould
02.10.2017 - This Dutch industrial company developed a solution to manufacture singly and doubly curved composite and plastic panels using numerical controlled production techniques. In this way an expensive mould is not necessary. They are looking for partners who are looking for technology to manufacture double...
Italian company offers new technologies for biodegradable plastic manufacturing
19.07.2017 - An Italian company, working in the field of compostable raw material and biodegradable additive, has developed a biopolymer that allows the creation of biodegradable and compostable products, and an innovative plastic additive product that makes possible the biodegradation of polyethylene, polypropylene...
New opportunities for mould developers by cost saving or new functions enabling multi-material mouldings with closed skin-core-structure
13.06.2017 - A small German engineering company offers its knowhow for the design of multi-material mouldings with closed skin-core structure basing on a co-injection/sandwich moulding technology to mould developers. The technology enables cost savings by using regenerated core material respectively lightweight...
Biodegradable filaments for 3D printing
17.03.2017 - A university from Latvia has developed biodegradable filaments for 3D printing, which are environmentally friendly, technically equivalent to their fossil counterparts, compatible with a wide range of desktop 3D printers, and have a competitive price. The university is seeking research cooperation agreements...
A technical effective solution is sought to raise the productivity of the manufacturing process of polymer and plastic compounds based rectangle pipelines for the sucking air industry
18.01.2017 - An Israeli manufacturer of rectangle pipelines polymer-and-plastic-compound-based, for the sucking air industry, is searching for partners from the Industry, Academy or Research Organizations, active in the fields of R&D of polymer compounds, electronics and plastic manufacturing, owning relevant technologies,...
Cost effective solvent free low temperature continuous process for pharmaceutical blister packs and other related packaging
29.11.2016 - A UK based SME has developed a new manufacturing process for flexible packaging materials, including blister foil. The process uses no solvents, is low temperature and offers cost reductions over existing packaging technologies. The company is looking for an industrial partner who may be interested...
1 bis 15 von 343 News « ‹12345›»
Aktuelle Geschäftskontakte
Geschäftspartnersuche im Bereich Thermoform- und Tiefziehteile aus Kunststoff / Wir bieten Vertriebsunterstützung!
Top News / Meist gelesen
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

» Jetzt anmelden!

» Weiterempfehlen

Machen Sie Ihre Reste zu Geld!
Sie haben Neuware-Restmengen, Mahlgüter oder Produktionsabfälle?

Dann veräußern Sie diese kostenlos
in der Rohstoffbörse.

Für Ihre ausrangierten Maschinen und Anlagen finden Sie Abnehmer in der Maschinenbörse.
Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PP Granulat [€/kg]
Neue Fachbücher
Simulationsgestützte Bestimmung und Optimierung der Mischgüte in der Einschneckenextrusion

Die Wirtschaftlichkeit einer Extrusionsanlage ist insbesondere dann gegeben, wenn ein hoher Massedurchsatz bei ausreichend hoher Qualität der Kunststoffschmelze gewährleistet ist, die direkt mit der resultierenden Qualität des Endproduktes sowie der Ausschussrate der Produktion korreliert.