Die Suche nach "plasti" in Technologie-Transfer brachte 422 Treffer.

61 bis 75 von 422 News « ‹34567›»
zurück zur Suche
Technology for catalytic cracking of polyolefin (plastic) waste
28.04.2015 - SME from South West of Poland has developed a technology concerning a chemical reaction (catalytic cracking) of polyolefin wastes. Advantage of this offer is ability to reuse waste as wholesome material. Plastic (polyolefin) waste will be used in the process to restore it to re-cycle life and not burned...

Anzeige

Wozu dient eine Niveau-Regulierung im Sammelbehälter bei Loss-in-Weight-Dosiersystemen?
Um den Durchsatz des Dosiersystems an den Durchsatz des Extruders anzupassen, gibt es zwei gebräuchliche Methoden. Meistens wird ein Signal des Extruders, das linear zur Extruderdrehzahl ist, dazu verwendet.
Package of innovative technologies for tool management in the plastics industry
20.04.2015 - A German SME developed a technology package for tool management in the plastics industry. The technologies provide comprehensive information about the location and condition of tools as well as the production process, minimising machine shutdown times caused by the loss or breakage of tools. The company...
Innovative and integrated device to collect, grind and compress organic and inorganic waste
01.04.2015 - An Italian inventor has designed an innovative device for the management of municipal solid waste. The system easily allows to store the waste and to obtain raw materials, ready to be recycled without further steps, from refineries specialized in the processing of raw materials, like plastic, glass,...
Unique and innovative plastic processing method and compounding
26.03.2015 - An small and medium sized company (SME) from Germany developed a new plastic recycling method, which allows an holistic treatment of rubber and plastic production waste. The particles can be inexpensively manufactured
Novel micron-sized carbon filler to improve material performance for lightweight applications
09.03.2015 - A Dutch university spin-off company develops and manufacturers a new material consisting of pure carbon that forms micron-sized three dimensional networks. These provide an optimum structure for enhancing the transfer of electrons, heat or mechanical forces. Added in low amounts, the performance of...
Application of fibre reinforced unidirectional tape
02.02.2015 - A Dutch company developed a flexible industrial process for impregnating glass and carbon fibres with different types of thermoplastic materials. This technology enables to produce unidirectional tapes with properties tailored to the specific needs of clients. The Dutch partner seeks contact with manufacturers...
Integration of novel nano materials into existing production lines
28.01.2015 - A research team from a Greek research centre is looking for partners to submit a proposal for H2020-NMP PILOTS-2015-one-stage.The project aims to introduce novel nanotechnology concepts in current manufacturing chains for the production of nanocomposites addressing specific applications in the automotive...
Technology for Eco-sustainable and Economical WPC (Wood Plastic Composites) profiles
27.01.2015 - An Italian company developed a new technology for the production of coextruded WPC (Wood Plastic Composites) profiles that allows to reduce the production costs and enhance the eco-impact of standard WPC materials. This product joins a poor material in the core (heterogeneus plastic from post-consume...
Innovative joining and assembly process for the manufacturing of long-term tight polymer-metal-hybrids
16.01.2015 - The chair of polymer technology at a German university is looking for project partners in order to submit a proposal for the H2020-FoF12-Call "Industrial technologies for advanced joining and assembly processes for multi-materials”. Aim of the project is the development of an innovative joining and...
Technology for integrated plastics/rubber recycling into useful products
18.12.2014 - A Ukrainian university developed an environmentally friendly technology for integrated plastics/rubber recycling into useful products (soles, accessories/garnitures etc) using a set of equipment for grinding, moulding and mechanical polishing. It can be used in mechanical engineering and chemical/light...
New technique to remove hazardous substances in waste packaging by supercritical carbon dioxide in the recycling process
18.12.2014 - A Spanish technology centre is developing a new technique for eliminating hazardous substances from waste polyethylene (PE) packaging to be used for solvents or phytosanitary products. This technique uses a technology that applies supercritical carbon dioxide (sc-CO2) in the extrusion phase of the plastic...
Easy-to-clean sol-gel based coatings
10.12.2014 - A French SME specialized in polymer and sol-gel nanotechnologies has developed easy-to-clean coatings based on sol-gel chemistry. These customizable coatings improve the cleanability of various kind of substrates even plastic ones thanks to a low temperature curing. They can also be used for optical...
Food packaging technology and machines for welding soak pads to plastics trays for food products
03.12.2014 - A Dutch company, active in developing, engineering and building machines for food packing lines, is looking for new partners in packaging food products. They have a special knowledge of ultrasonic welding of soak pads to plastic trays for food packaging industry. Application of this technology lies...
Abrasion and scratch resistance sol gel coatings for plastic, metal and glass substrates
26.11.2014 - A French SME specialized in sol gel based coatings has developed a range of sol gel coating materials to implement scratch resistant /abrasion resistant coatings. These coatings include various sol gel compositions allowing the application at low temperature on plastics. Moreover, this customizable...
Hot melt sealing compounds sought for shrink sleeves in gas/water pipelines
14.11.2014 - An Italian producer of hot melt sealants and adhesives is looking for a technological partner with adequate lamination equipment for combining the hot dispensed sealing system to shrinkable thermoplastic films. The company is looking for a partner with an adequate know-how to be confident with an adequate...
61 bis 75 von 422 News « ‹34567›»
Aktuelle Geschäftskontakte
Geschäftspartnersuche im Bereich Thermoform- und Tiefziehteile aus Kunststoff / Wir bieten Vertriebsunterstützung!
Moderner Rotierer für neue Projekte – zuverlässige Lösung vom Profi
Top News / Meist gelesen
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

» Jetzt anmelden!

» Weiterempfehlen

Machen Sie Ihre Reste zu Geld!
Sie haben Neuware-Restmengen, Mahlgüter oder Produktionsabfälle?

Dann veräußern Sie diese kostenlos
in der Rohstoffbörse.

Für Ihre ausrangierten Maschinen und Anlagen finden Sie Abnehmer in der Maschinenbörse.
Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PE-HD Mahlgut [€/kg]
Neue Fachbücher
Physikalischer Schaumspritzguss - Grundlagen für den industriellen Leichtbau

Analysiert man die Menge der kompakt gespritzten Kunststoffformteile, so kommt man schnell zu dem Ergebnis, dass sich sicherlich mehr als die Hälfte davon kostengünstiger und mit besseren Toleranzen mittels Schaumspritzguss herstellen lassen.