Die Suche nach "mm" in Technologie-Transfer brachte 343 Treffer.

181 bis 195 von 343 News « ‹1112131415›»
zurück zur Suche
Preparation of POSS with perfect 3-D cubic symmetry to manufacture and improve properties of different plastics and coatings
20.01.2011 - A Spanish public research organisation has developed a simple procedure for the preparation of polyhedral oligomeric silsesquioxanes (POSS) with perfect 3-D cubic symmetry, containing an azide or azol group in their structure and with a controlled functionalization. These materials impart unique properties...

Anzeige

Wozu dient eine Niveau-Regulierung im Sammelbehälter bei Loss-in-Weight-Dosiersystemen?
Um den Durchsatz des Dosiersystems an den Durchsatz des Extruders anzupassen, gibt es zwei gebräuchliche Methoden. Meistens wird ein Signal des Extruders, das linear zur Extruderdrehzahl ist, dazu verwendet.
Line to produce blow-moulded thin and thick-walled netted-polyethylene tubing
14.01.2011 - A company from Northern Poland is looking for technology related with producing of blow-moulded thin and thick-walled netted-polyethylene tubing. It is the basic technology used in production of heat-shrink radiation-netted tubes. The new installation will enable higher throughput, hence reduce the...
Carbon Nanotubes as Additives in Polymer and Ceramic Nanocomposites
10.01.2011 - A Greek SME active in the synthesis of high-purity carbon nanotubes (CNTs) is seeking technologies for the development of carbon nanotubesbased composites for highstrength applications with a polymer (e.g., thermoplastic) or a ceramic material matrix. The technologies requested should ensure uniform...
Bolt caps for use in harsh environments
10.01.2011 - A French enterprise, a specialist in Plastic & Rubber Injection Technology, has developed a range of special bolt caps. These caps are specifically molded in a specific material developed by this French SME to guarantee good placement and efficiency for use in harsh environments (sea water, UV, ozone,...
A device for the diagnostics of micro-fractures in composites
18.12.2010 - A Science Centre was developed by a company from Southern Poland. The Centre aims at strengthening technological potential of light aircraft manufacturers and the aviation industry within Silesia region,as well as to conduction of researches on composite materials for industries connected with aviation....
Innovative Cabinets with Outdoor Enclosures Applied to Infrastructure Aspects
10.12.2010 - An Israeli SME specialising in manufacturing outdoor cabinets from reinforced polyester has developed a new type of the product providing high resistance to glass fibre blooming. A new cabinet is environmentally friendly, resistant to scratch & harsh environmental conditions, keeps aesthetic, is cost-effective....
Development of translucent glass fiber reinforced micro profiles and tubes
04.12.2010 - A Dutch SME is highly specialized in the development and manufacturing of pultruded high performance, fiber reinforced micro profiles (0,03-80 mm2). Based on the current micro pultrusion process they have modified the process in such a way they can produce (semi) translucent profiles which can be used...
Technologies for composites products for aeronautical and other transportation applications
04.12.2010 - A Research Organization based in southern Italy provides services for the development of new products and technologies in the field of composite materials. This is based on a well-established skills on thermoplastic/thermosetting composite technologies, recycling, and hybrid composite structures with...
Know-how and expertise in photopolymers materials and UV (Ultraviolet) Curing
28.11.2010 - A French company developed an expertise in the photopolymers materials and UV-curing field. The technology uses high performance Ultraviolet (UV) curable coatings based on Nanotechnologies and Nanocomposites. It allows a rapid curing and it is environmentally friendly, solvent-free and cross-linked...
Composite design, processing and characterization
26.11.2010 - A Belgian collective research center proposed some skills in designing composite materials and offers different process equipments dedicated to both thermoplastics and thermoset matrices. This offer is mainly oriented towards lab and prototype scale projects which could be based on hand lay-up, thermo-compression...
Composite design, processing and characterization
25.11.2010 - A Belgian collective research center proposed some skills in designing composite materials and offers different process equipments dedicated to both thermoplastics and thermoset matrices. This offer is mainly oriented towards lab and prototype scale projects which could be based on hand lay-up, thermo-compression...
Biodegradable metarials for packaging production
17.11.2010 - A Polish researcher developed biodegradable materials for packaging production. Solid materials are made of starch and polyurethane. This technology can be applied in the production of different types of one-time use packaging. Industry parties interested in license agreement or commercial agreement...
Cutting and Handling Technology for Micropolymer Rods
11.11.2010 - A large US company is looking for proposals for products or technologies that can accurately cut and enable precise mechanical manipulation of micropolymeric rods. They are interested in licensing, co-development, equipment purchase (prototype, pilot or commercial scale). (TECHNOLOGY REQUEST, ref.:10...
Novel high pressure tank for gases consisting of fibre-reinforced plastic with flat or practically flat lids
20.10.2010 - A SME located in the Northeast of Germany has developed a novel high pressure tank for gases only consisting of fibre-reinforced plastic with flat or practically flat lids. These pressure tanks have a very low weight and a higher specific storage capacity compared with the usual gas tanks. The company...
High-end smart material applications based on magnetic responsive rubbers
09.10.2010 - A Dutch SME is specialized in the development and production of Magnetic Smart Materials. The company offers expertise, co-engineering and Magneto Responsive Elastomers for the production of smart material applications. Main advantages are controllable properties regarding among others stiffness, vibration...
181 bis 195 von 343 News « ‹1112131415›»
Aktuelle Geschäftskontakte
Geschäftspartnersuche im Bereich Thermoform- und Tiefziehteile aus Kunststoff / Wir bieten Vertriebsunterstützung!
Top News / Meist gelesen
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

» Jetzt anmelden!

» Weiterempfehlen

Jetzt Kosten im Einkauf senken!
Neuware-Restmengen, Regranulate oder Mahlgüter für Ihre Produktion erhalten Sie in der Rohstoffbörse.

Neue und gebrauchte Maschinen & Anlagen finden Sie in der großen Maschinenbörse.

Kostenfreie Nutzung aller Börsen! Registrieren Sie sich jetzt!

Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PC Granulat [€/kg]
Neue Fachbücher
Kunststoffchemie für Ingenieure

Mit der bereits fünften Auflage in eineinhalb Jahrzehnten liegt dieses Standardwerk "Kunststoffchemie für Ingenieure" wiederum in gründlich überarbeiteter, aktualisierter Form vor.