Die Suche nach "net" in Technologie-Transfer brachte 1018 Treffer.

661 bis 675 von 1.018 News « ‹4344454647›»
zurück zur Suche
Atmospheric Cold Plasma Technology to Functionalize Thermoplastic Materials for Improved Adhesion with Dienic Rubbers
01.09.2010 - A large US company is looking for proposals for the functionalization of thermoplastic materials by atmospheric cold plasma so that they can be permanently adhered to dienic rubbers without using adhesive systems. They are interested in licensing, product acquisition, contract research, proof of concept...

Anzeige

Wozu dient eine Niveau-Regulierung im Sammelbehälter bei Loss-in-Weight-Dosiersystemen?
Um den Durchsatz des Dosiersystems an den Durchsatz des Extruders anzupassen, gibt es zwei gebräuchliche Methoden. Meistens wird ein Signal des Extruders, das linear zur Extruderdrehzahl ist, dazu verwendet.
Composite Preforming Technology
27.08.2010 - A Dutch spin off company of a university of technology has developed an automated manufacturing process to produce preforms for high end composite products. The expected improvements, when compared to traditional lamination techniques, include a higher product quality, better reproducibility, faster...
Kneading, Extruding, and Rolling Technologies for Rubber Sheets
25.08.2010 - A large US company is looking for proposals for kneading technology that evenly mixes carbon filler into rubber materials and continuously forms the compound into precise sheets. They are interested in equipment sale and technology licensing. (TECHNOLOGY REQUEST, ref.:10 US 87GA 3ICY) Link to...
Seeking Olefin Copolymer Supply
25.08.2010 - A large US company is looking for immediate supply of a thermoplastic olefin copolymer. The company currently uses a low Tg low melt index copolymer in a high modulus laminate film application. They seek an alternate polymer type or source. They are interested in immediate proof of concept, leading...
New applications for biodegradable material used in golf tees
24.08.2010 - A Swedish company has developed a biodegradable material made of a biopolymer filled with chalk and talc and additives. The material is resistant in air. The biodegradation begins once in contact with soil moisture, sunlight and heat. Carbon dioxide and water are formed when the material is degraded....
New food container with vacuum sealing system
21.08.2010 - A Spanish company working in the food transportation sector has designed and patented a container with an innovative vacuum system, helping the food preservation while being transported. The vacuum sealing system is manually operated, using a double lid mechanism that extracts the air from inside until...
Looking for polymer development/supply for multi-support 3D deposits
20.08.2010 - A French SME specialized in 3D-deposition on various communication supports (papers, cardboards, plastics, metals, fabrics,) is looking for a technical collaboration and commercial agreement on polymer materials for imprinting applications for visually-impaired readers and touch-perceptive reading....
Lightweight and heavy-duty composite sandwich panel technology for outrigger pads
19.08.2010 - A Dutch company, with its roots in the aerospace industry, developed a lightweight and heavy-duty composite sandwich panel technology for outrigger pads. By combining the properties of thermo-set and thermo-plastic composite materials, a unique set of material specifications - high stiffness and compression...
Thermal dissipation compound for applications in electronics
19.08.2010 - A French laboratory from Midi-Pyrenees has developed a new process to manufacture thermal compound for drawing heat away from processors. The material is as efficient as best products available on the market: its thermal conductivity is excellent and its viscosity depends on the blend composition. This...
ESA: Carbon Nanotube Composite EMI Compatible Electronic Box
18.08.2010 - The technology is a combination of both new material development and EMI aware design of CFRP products. The biggest innovation in this product is the fact that it is the first use of a conductive resin doped with Carbon Nanotubes out of a laboratory environment. A process was developed with which this...
Manufacturing and maintenance of composite (aircraft) radomes and components
18.08.2010 - A Dutch company is specialised in the manufacturing and maintenance of composite components for the aerospace & defence industry. The company is certified by the Civil Aviation Authority for composite aircraft component repair and testing and has a focus on the repair of (aircraft) radomes and radar...
Biodegradable and/or sustainable razor handle
18.08.2010 - A multinational active in the consumer goods sector looks for a razor handle that is biodegradable or that can be manufactured from a rapidly regenerating renewable resource, while not significantly degrading the performance of the product from a structural, drop test and customer use perspective. Belgian...
Polymer based solutions for long wearing color and superior feel in cosmetic products
18.08.2010 - A multinational active in the consumer goods sector looks for polymer based solutions for long wearing color and superior feel in cosmetic products (face, lips or eyes long wear formulations). Belgian company is open to various types of partnerships depending on the state of development and Intellectual...
A device for examining polymer elements in sliding interactions
07.08.2010 - Scientist from a Polish Technology University patented a device for examining polymer elements in sliding interactions. The device and methodology allow for analyses and measurements by comparison of interactions between elements before these are produced or modified. The device greatly expands the...
Enhanced mechanical properties, Viscoelastically prestressed polymeric matrix composites
05.08.2010 - A UK university has developed a novel polymeric composite which exploits viscoelastic prestress. Relative to unstressed counterparts, tensile, flexural & impact properties are improved, product geometry is unrestricted & prestress levels are less likely to deteriorate with age. The University seeks...
661 bis 675 von 1.018 News « ‹4344454647›»
Aktuelle Geschäftskontakte
Moderner Rotierer für neue Projekte – zuverlässige Lösung vom Profi
Geschäftspartnersuche im Bereich Thermoform- und Tiefziehteile aus Kunststoff / Wir bieten Vertriebsunterstützung!
Top News / Meist gelesen
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

» Jetzt anmelden!

» Weiterempfehlen

Machen Sie Ihre Reste zu Geld!
Sie haben Neuware-Restmengen, Mahlgüter oder Produktionsabfälle?

Dann veräußern Sie diese kostenlos
in der Rohstoffbörse.

Für Ihre ausrangierten Maschinen und Anlagen finden Sie Abnehmer in der Maschinenbörse.
Neue Fachbücher
Experimentelle und simulative Analyse der Mischwirkung in Einschneckenextrudern

Eine Vielzahl von Kunststoffen wird zur Produktion von Halbzeugen und Fertigprodukten auf Einschneckenextrudern aufbereitet bzw.

Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PE-LD Mahlgut [€/kg]