Die Suche nach "plasti" in Technologie-Transfer brachte 422 Treffer.

151 bis 165 von 422 News « ‹910111213›»
zurück zur Suche
Deposition, coating and sandwiching of any „un-joinable” metals, carbides and plastics at high speed
05.12.2012 - A UK start-up has progressed cold spray methods assisted by laser. Not only is the process faster and cheaper but more importantly, any metals and alloys tested so far fuse. Also, carbides and inorganics can be deposited or sandwiched onto plastics and other metals. This opens up limitless possibilities...

Anzeige

Wozu dient eine Niveau-Regulierung im Sammelbehälter bei Loss-in-Weight-Dosiersystemen?
Um den Durchsatz des Dosiersystems an den Durchsatz des Extruders anzupassen, gibt es zwei gebräuchliche Methoden. Meistens wird ein Signal des Extruders, das linear zur Extruderdrehzahl ist, dazu verwendet.
Composite slabs from polymer waste for paneling
27.11.2012 - A Latvian company has developed technology for production of composite slabs from thermoplastic waste for paneling of outer walls of buildings. The company offers the technology for implementation to building materials producers or waste management companies. (TECHNOLOGY OFFER, ref.:12 LV 58AD 3R09)...
„Whole tyre“ and plastics pyrolysis recycling process
22.11.2012 - An Irish based process plant design specialist has developed a tyre recycling (pyrolysis) process that processes whole tyre without the requirement for pre-processing steps to separate the rubber from the metal. Should only mixed plastics be treated rather than tyres, the plant can be simplified. ...
Manufacturing of composite materials based on used coffee grounds
13.11.2012 - A London-based company has developed a composite material based on used coffee grounds and recycled plastics. The product consists of 99% recycled materials and is fully recyclable itself. With good mechanical properties, a nice finish and excellent environmental credentials, the product has attracted...
Mixed Plastic Waste Management Technology for Plastic Extrusion
10.11.2012 - An Estonian SME has developed a full cycle plastic waste management technology for using all kind of mixed low quality plastic household waste for production of quality plastic profiles (incl. terrace boards, noise restriction walls, tongue and groove boards, etc.). This kind of technological solution...
Search for polyethylene materials for small playground towers
10.11.2012 - An italian small company, specializing in manufacturing of playground equipment, is looking for innovative polyethylene materials to realize small towers for playgrounds. It is looking for innovative plastic materials able to confer to product aesthetic appeal and sense of quality greater than the current...
Welding technology for carbon fiber reinforced thermoplastic composites
09.11.2012 - A Dutch company is specialized in high-end composite product and process engineering with a special focus on thermoplastic composite components. High performance engineering thermoplastics are increasingly combined with continuous carbon fiber reinforcements. The company developed an efficient assembly...
Innovative packaging solution for the Seafood sector
07.11.2012 - A Scottish company has developed a patented and innovative packaging solution for the seafood sector which allows portions of food to be secured via the application of a food quality film by vacuum. The solution ensures that the packaging is strong and re-usable, lightweight, easy to use, compostable,...
Colouring technology for plastic shielding of cables
25.10.2012 - A Dutch company is specialized in the production of isolated copper cables. The company is seeking technologies that enable a more flexible way to change the inline coloring of the plastic mantle of the cables and to use more specific colors. The company is interested in a license agreement or a cooperation...
A new technology for the production of light weight plastic parts
11.10.2012 - A Spanish company has developed a technology used to produce plastic parts with reduced weight, complex shapes, from a variety of polymers, with excellent surface quality and reduced internal stresses. This novel process uses cheaper molds and equipments than those used in injection molding, therefore...
Electrochromism film that changes its colour when voltage supply changes
11.10.2012 - A Spanish company with expertise in electronics is demanding an electrochromism film or plastic that changes its colour when the voltage supply changes. The technology will be used for automatic sunglasses. The company is looking for plastics or films providers for license agreements or technical cooperation....
Metal Plating of Thermoset Plastic Parts
11.10.2012 - A Fortune 500 Consumer Products Manufacturer with manufacturing plants in the United States and throughout the world invites proposals for improved methods for producing smooth uniform metal plated surfaces on thermoset plastic parts. (TECHNOLOGY REQUEST, ref.:12 US 87GB 3QK7) Link to more detailed...
Cost efficient non-hazardous flame retardant
10.10.2012 - A Swedish speciality chemical company has developed and patented an environmentally-friendly and biodegradable flame retardant, competitively priced for industrial use. It has a wide range of applications and can be adapted for use with many materials, such as polymers, plastics, synthetics, and natural...
Plastic tanks for rainwater storage
01.09.2012 - An Italian manufacturer company specialised in injection molding technology for the production of plastic pots and containers has developed a new way for rainwater storage to be used for feeding plants. The main innovation of this product is the possibility to use the natural rainwater for feeding the...
Self Adhesive Waterproof GRP (glass reinforced plastic) Material Cured by Exposure to Sunlight or UV Rays
01.09.2012 - A Scottish SME has patented a malleable, self-adhesive, waterproof, GRP (glass reinforced plastic) material which hardens rapidly when exposed to UV light. It can be used as a repair and maintenance solution in a multitude of applications e.g. domestic repairs (DIY and trade), construction, (protection,...
151 bis 165 von 422 News « ‹910111213›»
Aktuelle Geschäftskontakte
Geschäftspartnersuche im Bereich Thermoform- und Tiefziehteile aus Kunststoff / Wir bieten Vertriebsunterstützung!
Moderner Rotierer für neue Projekte – zuverlässige Lösung vom Profi
Top News / Meist gelesen
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

» Jetzt anmelden!

» Weiterempfehlen

Machen Sie Ihre Reste zu Geld!
Sie haben Neuware-Restmengen, Mahlgüter oder Produktionsabfälle?

Dann veräußern Sie diese kostenlos
in der Rohstoffbörse.

Für Ihre ausrangierten Maschinen und Anlagen finden Sie Abnehmer in der Maschinenbörse.
Neue Fachbücher
Simulationsgestützte Bestimmung und Optimierung der Mischgüte in der Einschneckenextrusion

Die Wirtschaftlichkeit einer Extrusionsanlage ist insbesondere dann gegeben, wenn ein hoher Massedurchsatz bei ausreichend hoher Qualität der Kunststoffschmelze gewährleistet ist, die direkt mit der resultierenden Qualität des Endproduktes sowie der Ausschussrate der Produktion korreliert.

Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PE-HD Granulat [€/kg]