Die Suche nach "plasti" in Technologie-Transfer brachte 422 Treffer.

226 bis 240 von 422 News « ‹1415161718›»
zurück zur Suche
Tensile Test Specimen for Polymers - Mechanical properties of plastics now observable due to tensile stage
30.05.2011 - A large German Research Institute has developed a tensile stage (Tensile Test Specimen for Polymers) which offers the possibility to observe, under the electron microscope, in a tensile test, morphological changes along the fracture zone and to record the mechanical data in stress-strain diagrams. This...

Anzeige

Wozu dient eine Niveau-Regulierung im Sammelbehälter bei Loss-in-Weight-Dosiersystemen?
Um den Durchsatz des Dosiersystems an den Durchsatz des Extruders anzupassen, gibt es zwei gebräuchliche Methoden. Meistens wird ein Signal des Extruders, das linear zur Extruderdrehzahl ist, dazu verwendet.
Reverse Printed film for plotter cutting
24.05.2011 - An Italian TTC (Technology Transfer Centre) developed a new method to produce a printed polyurethane film suitable for plotter cutting. The product is composed of a PET (Polyester) film + PU (Polyurethane) skin + adhesive or thermoplastic PU. It can be applied on textile for decoration and/or branding...
Knowledge regarding compounds or agents for purging and cleaning of plastic processing equipment
21.05.2011 - A small Dutch company is looking for know-how regarding purging and cleaning compounds for plastic processing equipment. The company is interested in the development of an agent which can be specially used for removing thermoplastic polymer residues with a very high melting point (> 360 C). (TECHNOLOGY...
Technology for production of building materials utilizing polymer waste
14.05.2011 - A Latvian company with a lasting experience in polymer research has elaborated a technology for utilization of thermoplastic polymer waste fractions which are not suitable for recovery of clean polymer and usually are deposited in landfills. The industrial or household waste polymer (polyethylene, PET,...
FP7 PS: Polytank – Development and Validation of Ultrasonic NDE Techniques for Welded Joints in Plastic Tanks
14.05.2011 - An FP7 Research for SMEs consortium, led by an East of England based Research Centre is looking for a partner for a Research for the benefit of SMEs proposal. The project aims to develop and validate ultrasonic NDE techniques for welded joints in plastic tanks. An SME ultrasonic transducer developer...
Orbit Type Tyre Retreading Machine
12.05.2011 - A Turkish company specialized in manufacturing of rubber and plastic polyurathane machines has developed an innovative orbit type tyre retreading machine. According to traditional retreading machines, this machine has higher speed and can also retread tyres of engineering vehicles. The firm is looking...
Innovative numerical validation of thermosetting plastic pieces with optical specifications
11.05.2011 - A Spanish technological centre has developed a methodology that allows anticipating anomalies induced by the manufacturing process in thermosetting plastic pieces, applying leading simulation technologies with Finite Element Method (F.E.M.). The institution is looking for companies that need the manufacture...
A Brussels-based association seeks solutions to better extract and recover plastic scraps from electronical and electronic waste
11.05.2011 - As part of its dismantling activity, a Brussels based association specialized in the recovery of electric and electronical waste (WEEE) is looking for innovative solutions to better sort and recover the electronical plastic scraps generated from the dismantling of hardware computer equipments. The objective...
Innovative drying, dosing and preheating of thermoplastics, granules, grain and wood chip
02.05.2011 - A Swedish SME offers a high speed technology for efficient drying of free-flowing bulk materials, grain, powder, wood chip and other granules including pharmaceutical dittos. The simple, environmentally friendly and innovative drying concept provides a result with good quality, increases productivity...
Preparation of nanosized sepiolite as additive compatible with polymer material
02.05.2011 - A Spanish Technological Center is looking for a technology for getting nano-sized organoclay sepiolite. They would carry out the preparation of organoclay nanocomposites adding sepiolite to certain plastics to improve their characteristics. The Center is also interested in acquire the transfer of knowledge...
New applications for bamboo fibre as reinforcement of composites.
02.05.2011 - A Dutch company has developed a process for the large scale manufacturing of natural fibre thermoplastic composites. They produce a wide range of bamboo fibre reinforced compounds. With their expertise the company is looking for partners to investigate applications of bamboo fibre for composites with...
Halogen-free Flame Retardants for Plastics - Tailor-made solutions through special modular system
19.04.2011 - A large German research institute has developed halogen-free flame retardants for plastics. By means of a special modular system, this technology allows tailored solutions to be found in a relatively short period of time. In this way, an optimum of flame protection needed, toxicological requirements,...
Modification of natural fibres as a replacement for glass fibre in reinforced plastics
17.04.2011 - A UK based SME has developed a process to modify natural fibres as a replacement for glass fibre. The process will initially focus on developing modified natural fibres for the transport industry; however the company is looking to produce an alternative to glass fibres in all its formats. The company...
Self-lubricating plastic material - lubrication on demand
14.04.2011 - A German institute from Bavaria developed a self-lubricating plastic material. The plastic material lubricates itself by microcapsules which contain a lubrication fluid. The microcapsules incorporated into the plastic will be destroyed as a result of friction which results in the release of lubricating...
Using Bioplastics to make Optical Components
08.04.2011 - A large US company is looking for proposals for plastics made from sustainable sources of biomass for use as opaque reflectors or clear optical lenses. Optimally, the manufacturing and optical properties of bioplastics should be the same as currently used petroleum-based plastics.They are interested...
226 bis 240 von 422 News « ‹1415161718›»
Aktuelle Geschäftskontakte
Moderner Rotierer für neue Projekte – zuverlässige Lösung vom Profi
Geschäftspartnersuche im Bereich Thermoform- und Tiefziehteile aus Kunststoff / Wir bieten Vertriebsunterstützung!
Top News / Meist gelesen
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

» Jetzt anmelden!

» Weiterempfehlen

Machen Sie Ihre Reste zu Geld!
Sie haben Neuware-Restmengen, Mahlgüter oder Produktionsabfälle?

Dann veräußern Sie diese kostenlos
in der Rohstoffbörse.

Für Ihre ausrangierten Maschinen und Anlagen finden Sie Abnehmer in der Maschinenbörse.
Neue Fachbücher
IKT: Lehrbuch „Kunststofftechnik – Einführung und Grundlagen“ in neuer Auflage

Das Lehrbuch „Kunststofftechnik – Einführung und Grundlagen“ von Prof. Dr.-Ing. Christian Bonten, dem Leiter des Instituts für Kunststofftechnik an der Universität Stuttgart, IKT, ist in seiner vierten Auflage erschienen (Carl Hanser-Verlag, München, 557 Seiten, Flexibler Einband, 4c, 69,99 Euro).

Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PVC-h Mahlgut [€/kg]