Die Suche nach "plasti" in Technologie-Transfer brachte 422 Treffer.

346 bis 360 von 422 News « ‹2223242526›»
zurück zur Suche
Innovative laser welding solution for honeycombs structures made with thermoplastic elements
26.06.2009 - A French Technical Research Centre dedicated to laser processing developed laser welding solution for honeycombs structures made with thermoplastic elements (a process of assembly by laser thermoformed polymer sheets). It provides original perfect liaison between the sheets welded to ensure a tensile...

Anzeige

Wozu dient eine Niveau-Regulierung im Sammelbehälter bei Loss-in-Weight-Dosiersystemen?
Um den Durchsatz des Dosiersystems an den Durchsatz des Extruders anzupassen, gibt es zwei gebräuchliche Methoden. Meistens wird ein Signal des Extruders, das linear zur Extruderdrehzahl ist, dazu verwendet.
Mobile separator for plastic bottles with bi-purpose nipper
20.06.2009 - Macedonian inventor is offering specific type of mechanism for cutting of plastic PET bottles. Separator is mobile and can be used directly on site where bottles are disposed. The innovative idea of this product is through easy and quick cutting allowing effective deposition of bottles for transport...
Products for dialysis: Steel needle in combination with plastic catheter for use in fistulas during dialysis
09.06.2009 - A small company in West Sweden is developing a novel fistula catheter for haemodialysis. The company is now looking for expertise and knowledge in manufacturing of needles and catheters for medical applications. The company is looking for assistance in the development of "steel needle within plastic...
Technology of processing plastics products with the use of biodegradable materials
28.05.2009 - Polish company specalized in intrusion moulding production is looking for technology for production of plastic products with the use of biodegradable materials. The partner sought should be able to provide technology itself and be ready to supplying of ready to use materials (granulate ready to use...
Expertise in failures analysis and durability prediction of polymers (plastics) materials
27.05.2009 - A French research center offers a specific expertise in failures analysis and durability prediction of polymers (plastics) materials. This center can deliver services in order to : - Determine initial properties and failure problems both immediately after fabrication and after service life. -...
Method to inject thermoplastic micro-pieces
26.05.2009 - Technology Centre from Spain is looking for an economic and simple way to produce plastic parts, weighing less than 1 mg, through injection moulding. They are interested in finding research partners for cooperation. (TECHNOLOGY REQUEST, ref.:09 ES 25E2 3CY5) Link to more detailed information....
Bioplastics for food packaging
16.05.2009 - An Italian University offers its know-how/expertise on polymers, biopolymers and nanostructured materials. A large number of experimental techniques and the morphologic, structural and physico-chemical properties of these materials allow that the application of such materials can cover many sectors,...
Bioplastics trade and material custom-built development
08.05.2009 - The company is engaged in international trade of bioplastic raw materials from different producers and development of custom-made solutions. The offer is to support plastic converters and end-users in their bioplastics project from the feasibility study to the supply of raw materials and additives in...
Lamp-post for street HBLED (High Brightness Light Emitting Diode) lights from plastic and glass-fiber
26.04.2009 - A Polish external lighting manufacturing company developed technology of production of external lighting based on High Brightness Light Emitting Diode (HBLED). The company is looking for innovative lamp-post as semi-finished product in manufacturing process of external lighting. The lamp-post must be...
Innovative processing of fibre reinforced plastics (FRP)
16.04.2009 - An EASA certified SME from northern Germany offers high performance processing of fibre reinforced plastics (FRP). FRP on carbon basis is used in the automotive industry, in aerospace applications, generally where strong but lightweight structures are important. The Company owns special know-how in...
Technology and know-how for the drying of recycled plastic electrical wiring
08.04.2009 - A Basque SME devoted to the recycling of electrical wiring, scrap units and non-hazardous waste is looking for the technology and know-how required to implement a system in the company plant that will reduce the final product humidity to 1% so it can comply with new market specifications. (TECHNOLOGY...
Laser Welding of wood to plastics
03.04.2009 - A German institute made investigations for applications in the field of welding of fiber reinforced thermoplastic and wood composites with polymers. Weldability and weld behaviour of materials using different laser beam sources, new thermographic approaches for evaluation of materials qualification...
Novel processes for dry machining of thermoplastic composites
21.03.2009 - A Belgian RTD research centre is looking for partners that have experience with machining composite parts, with the material behaviour during and after machining, etc. or partners who are interested in building up experience in this field. Many composite parts require additional machining/finishing,...
New polystyrene pellets production with use of building waste
24.02.2009 - A Polish company developed the technology of production of new polystyrene pellets with use of building waste. Technology combines the light polystyrene pellets with an additive containing an anionic solution (surface active, PH neutral) with building waste (polystyrene waste, plastics, rubber). The...
An innovative bottle top
30.01.2009 - A UK SME has developed an innovative plastic bottle top to suit most bottles. It provides a spring loaded leak-proof bottle top design to allow liquids to be dispensed through a pouring top. The patented release action moves across the bottle top releasing the plastic spring immediately stops the flow....
346 bis 360 von 422 News « ‹2223242526›»
Aktuelle Geschäftskontakte
Geschäftspartnersuche im Bereich Thermoform- und Tiefziehteile aus Kunststoff / Wir bieten Vertriebsunterstützung!
Moderner Rotierer für neue Projekte – zuverlässige Lösung vom Profi
Top News / Meist gelesen
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

» Jetzt anmelden!

» Weiterempfehlen

Jetzt Kosten im Einkauf senken!
Neuware-Restmengen, Regranulate oder Mahlgüter für Ihre Produktion erhalten Sie in der Rohstoffbörse.

Neue und gebrauchte Maschinen & Anlagen finden Sie in der großen Maschinenbörse.

Kostenfreie Nutzung aller Börsen! Registrieren Sie sich jetzt!

Neue Fachbücher
IKT: Lehrbuch „Kunststofftechnik – Einführung und Grundlagen“ in neuer Auflage

Das Lehrbuch „Kunststofftechnik – Einführung und Grundlagen“ von Prof. Dr.-Ing. Christian Bonten, dem Leiter des Instituts für Kunststofftechnik an der Universität Stuttgart, IKT, ist in seiner vierten Auflage erschienen (Carl Hanser-Verlag, München, 557 Seiten, Flexibler Einband, 4c, 69,99 Euro).

Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PP Ballenware [€/kg]