Injection molding machine 3 colors
(horizontal /vertical/ and 3. in L-position with protective housing)
with rotary table

immediately available from our warehouse in Hannover

Make: Arburg
Type: 420C 1000-150/150/60
year of construction 2003

Control: Selogica
Hours: 20092 h

+++++Schließeinheit+++++

Clamping force: 1000 kN / 1000 to.
tie bar distance: 420 x 420 mm
platen size: 570 x 570 mm

++++Injection unit 1 (150 unit) ++++
Screw size: 15 mm (high shut-off fixed)
Injection volume: 17 ccm
Injection weight: 15 gr.
Injection pressure: 2750 bar


++++Injection unit 2 (150cc unit) ++++
Screw size: 15 mm (highly screwed fixed)
Injection volume: 17 ccm
Injection weight: 15 gr.
Injection pressure: 2750 bar

++++Injection unit 3 (60cc unit) ++++
Screw size: 15 mm (highly screwed fixed)
Injection volume: 17 ccm
Injection weight: 15 gr.
Injection pressure: 2080 bar


Extras

1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine
mold clamping force 1000 kN voltage 400 V / 50 Hz

1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02

1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00

1 Technology level 2 - servo-controlled Hydraulic system with two control pumps for controlled machine movements, with path-dependent, controlled target ramps. The build-up of the tool clamping force is programmable and controlled. The clamping force is servo-controlled via the second pump. The nozzle contact force is programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03

1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40

1 heating tape for open nozzle VE-320/00

1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02

1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20

1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30
1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00

1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line and full protection VE-907/00

1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design with sintered metal backflow preventer, i.e. highly wear and corrosion resistant for processing thermoplastics with highly abrasive or corrosive components and for high temperature materials (L-position) VE-908/00

1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00

1 Nozzle tip with radius 15 (L-position) VE-910/00

1 Heating tape for open nozzle (L-position) VE-911/00

1 Position-controlled screw for the third injection unit on 3-K machines, with control valve on the injection unit, controlled back pressure and with nozzle contact force manually adjustable (prerequisite is technology level 2) VE-918/00

1 Control extension for holding pressure changeover via hydraulic pressure VE-471/01

1 Electrical connection for pneumatic valve gate nozzle in mold VE-317/00

1 Electrical connection for pneumatic valve gate nozzle in mold for third injection unit VE-913/00

1 for VE 317/00 and 913/00 "pneum. NVD in WKZ": 1 pneum. Control for nozzles in mold (mech. + electr.) includes 2 x 5/3 way valve incl. respective pressure adjustment; to be mounted on rear side of machine, at height of fixed platen (as for machine 185.801) VE-914/00

1 clamping plate set 420 with central injection position and centering diameter 125 mm VE-356/11

1 for VE 356/11 Clamping plate set: special bores in movable WKZ plate -for ejector: 4x D35 H7 on hor. + vert. axis, distance 100 mm each. Center axis distance 100 mm each, standard ejector bores (distance 85 mm). For ejector cross guide: holes offset from center axis to the right (see sketch) VE-921/00

1 Extension of the clamping tiebars for corresponding increase of the min. mold installation height to 350 mm, the opening stroke remains unchanged, the lateral protective housing must be increased according to the safety dimension (VE 389/01), the mold clamping area remains open at the top VE-357/35

1 Machine-related cooling circuits programmable controlled VE-525/02

1 for VE 525/02 "machine related cooling circuits": cooling circuits with measuring tube VE-916/00

1 Basic equipment for additional cooling water distributor with separate inlet and outlet, manually adjustable, with measuring tube for this purpose: VE-514/00

1 - 5 free cooling circuits, connection DN 13 VE-514/05

1 1. core pull control for simultaneous movements, the holding pressure is manually adjustable - for the serial movements pressure and flow are programmable - for the simultaneous movements the pressure is manually adjustable, the flow is load dependent Connections on moving platen, for machines with vertical clamping unit on hydraulic block; the hydraulic cylinders and hoses are not included VE-382/02

1 Extension for the hydraulic rotary control to run the ARBURG rotary unit, controlled, with brake ramps and programmable speeds VE-382/08

1 Hydraulically driven 3-station rotary unit for multi-component moulds for mounting on the moving mould fixing platen, rotary movement 120 degrees or 180 degrees continuous, incl. locking device, with 4 cooling circuits, ejector position at bottom or rear, supplied with additional parts such as hydraulic hoses and limit switches VE-919/00

1 for VE 919 rotary unit: special design for ejection in pitch circle 200, ejector possibility in upper or serv. (90°) cavity, recessed for ejector bolt D 24 VE-920/00

1 2nd core pull control for simultaneous movements, the holding pressure is programmable - for serial movements, pressure and flow are programmable - for simultaneous movements, pressure is programmable, flow is load-dependent Connections on moving platen, on machines with vertical clamping unit on hydraulic block; the hydraulic cylinders and hoses are not included in the scope of delivery (can be used in the S-series from T-2 controlled, in the C-series from T-2 servo-controlled) VE-382/13

1 for VE 382/13 core pull control: core pull incl. twin check valve VE-912/00

1 Out
1 for VE 572/00 Ejector cross in special design, adapted to movable WKZ platen, possibility to eject to 85 mm and 100 mm distance (upper or serv. (90°) cavity) incl. adapted shell coupling (without ejector bolt) VE-922/00

etc.

fully functional ejector cross for off-center ejection, in connection with 2-K-rotary units, for max. 3 ejector bolts incl. 1 shell coupling, applicable VE-572/00

[Description was hidden]