Die Suche nach "plasti" in Technologie-Transfer brachte 422 Treffer.

331 bis 345 von 422 News « ‹2122232425›»
zurück zur Suche
Re-usable Plastic cable-tie product for continuous banding & bundling
26.08.2009 - A UK SME has designed and developed a novel bi-directional system for easy fastening, banding or bundling of tubes, wiring, boxes, pallets or for staking trees, for shrubs & saplings & holding plants to trellises. It can be easily cut to the required length & permits easy assembly and tightening from...

Anzeige

Wozu dient eine Niveau-Regulierung im Sammelbehälter bei Loss-in-Weight-Dosiersystemen?
Um den Durchsatz des Dosiersystems an den Durchsatz des Extruders anzupassen, gibt es zwei gebräuchliche Methoden. Meistens wird ein Signal des Extruders, das linear zur Extruderdrehzahl ist, dazu verwendet.
A technology of plastic waste processing into components of liquid fuels
20.08.2009 - A Polish company has developed a technology of plastic waste processing to components of liquid fuels. In petrochemistry the component is applicat in fuel production, household chemistry, raw material for chemical production, paraffin and paste. The company is looking for potential licensing partners...
New plastic parts and process to complete RIM (reactive injection moulding) products
11.08.2009 - A French SME has developed a technology to produce polyurethane parts (such as automotive dashboard or furniture parts). This technology, by combining raw material and use of low-cost mould process, provides cheaper and better multicolour parts than Reactive Injection Moulding (RIM), since it avoids...
Dual plastic bottle for liquid formulations
11.08.2009 - A multinational company active in the consumer goods market looks for dual plastic bottles to hold and dispense liquid formulations. The sought technology should be available on the market or at least field tested. The company is open to various kinds of agreements depending on the proposed solution....
Plastics sorting for recycling & valorization
11.08.2009 - A French company specialized in waste & materials recycling and upgrading is willing to integrate new technologies for the sorting, the physical separation of mixed plastic wastes (rigid plastics such as PP, PE, PVC...) in order to valorize the mono-matters thereafter. Technologies already on the market...
Partners sought for the commercialisation of a polymer resin derived from sustainable plant materials
08.08.2009 - A UK based SME seeks collaborators/partners to commercialise a sustainable, thermosetting resin derived from plant materials, which would replace petro-chemical resins used for making composites for applications in industries such as construction, glass or fibre reinforced plastic (GRP/FRP), automotive...
Catheters or similar medical device manufacturing know-how
07.08.2009 - A Spanish Basque Company seeks a medical device manufacturing know-how, related to catheters, balloon catheters, tubes, made of silicon and plastic, or similar type products. The company is interested in a know-how acquisition and has investment capacity in global large scale elastomer processing of...
R&D services and new product developments with an innovative thermoplastic pultrusion technology
28.07.2009 - A French R&D company specialized in thermoplastic pultrusion offers R&D services to develop novel structural recyclable thermoplastic composite profiles based on its own novel technology. The company is looking for collaboration to operate new product developments on R&D dedicated pultrusion equipments...
Scents, fragances and deodorizers for plastics
24.07.2009 - A Spanish Technological Centre has developed a methodology to determine the best choice of parameters when using master batches in the production of plastics that release flavours and scents or with deodorizer effect. The methodology allows obtaining new formulations according to required properties....
Polyethylene Painting: an Application of Spray Pigmentation Process for Coating Plastic Articles
15.07.2009 - A Spanish and an Irish universities have developed a process to pigment coating plastic articles by means of spring polymer and pigment powder. The process is tested at laboratory scale and is based on the melting in situ of polymer powder in combination with the pigment onto the surface of the part...
Improvement of manufacturing process in order to classify different kinds of plastics
15.07.2009 - A Spanish SME dedicated to the recycling, processing, selecting and commercializing of different colours and compositions of plastics, needs to improve the classification products process they currently use. The company wants to improve the manufacturing process in order to get a better classification...
Thermoplastic Elastomers for Pipe Joint Seals used on Water Tube Cracks
15.07.2009 - A Spanish company produces brackets used to fix water pipe crack problems. When a water tube is broken, pipe joint seals are used to solve the problem and cover the hole. Brackets are made of a metal cover of stainless steal, special anti-corrosion screws, and internal rubber for seals. The company...
Continuous thermoplastic tubulars for the oil & gas industry
13.07.2009 - A Dutch company, specialised in the engineering and production of composite components, developed a production technology for continuous high-end and heavy-duty thermoplastic tubulars. The use of thermoplastic materials throughout the tubing wall results in a ductile, spoolable tubular, insensitive...
Valorisation of plastics contained in Automobile Shredder Residues (A.S.R)
01.07.2009 - A French company specialised in metal recycling, is looking for a technology of valorisation of plastics contained in A.S.R (Automobile Shredder Residues), in light and heavy fractions. The need is to recover plastics compatible with the extrusion process out of a flow of mixed plastics, rubber, wood,...
Method for a biological production of combustible gas from reinforced plastics
27.06.2009 - A German company developed a method which allows the further utilisation, linked with energy production, out of glass-fiber reinforced plastics. Such a synthetic material is used in boat building, aviation and rotor blades. Sought is a licence agreement or a joint venture with an SME for a further...
331 bis 345 von 422 News « ‹2122232425›»
Aktuelle Geschäftskontakte
Moderner Rotierer für neue Projekte – zuverlässige Lösung vom Profi
Geschäftspartnersuche im Bereich Thermoform- und Tiefziehteile aus Kunststoff / Wir bieten Vertriebsunterstützung!
Top News / Meist gelesen
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

» Jetzt anmelden!

» Weiterempfehlen

Jetzt Kosten im Einkauf senken!
Neuware-Restmengen, Regranulate oder Mahlgüter für Ihre Produktion erhalten Sie in der Rohstoffbörse.

Neue und gebrauchte Maschinen & Anlagen finden Sie in der großen Maschinenbörse.

Kostenfreie Nutzung aller Börsen! Registrieren Sie sich jetzt!

Neue Fachbücher
Experimentelle und simulative Analyse der Mischwirkung in Einschneckenextrudern

Eine Vielzahl von Kunststoffen wird zur Produktion von Halbzeugen und Fertigprodukten auf Einschneckenextrudern aufbereitet bzw.

Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PET Mahlgut [€/kg]