Search of "ON" found 2507 hits.

1036 bis 1050 von 2.507 News « ‹6869707172›»
back to search
Kreyenborg Plant Technology GmbH & Co. KG appoints Andreas Holt as Managing Director
13.04.2012 - As of February 1st, 2012 Mr. Andreas Holt has been appointed as managing director of Kreyenborg Plant Technology GmbH & Co. KG. Andreas Holt will be responsible for the operational business, announced the company. Andreas Holt studied mechanical engineering in Paderborn with focus on plastics and...
Lanxess: 50 percent reduction in weight with composite sheet hybrid technology
12.04.2012 - In cooperation with Lanxess and Bond-Laminates, ZF Friedrichshafen has developed a brake pedal based on nylon composite sheet and polyamide 6. As the materials suppliers says, this system is 50 percent lighter than comparable brake pedals made of steel, but has the same mechanical strength. Weighing...
Wittmann Battenfeld Mexico expands its facility
02.04.2012 - Continuing high demand for products from the Wittmann Group México has led to a further expansion of Wittmann México Headquarters in Querétaro, Qro. Since 1998 the Wittmann Group has directly supported and serviced the growing Mexican market with its own subsidiary. The business in Mexico has flourished...
Lanxess: Perlon-Monofil to raise prices worldwide for synthetic monofilaments - Price increases for Durethan in EMEA
27.03.2012 - Owing to continued steep rises in energy and raw material costs, from April 1, 2012, Perlon-Monofil GmbH is to raise its prices worldwide for synthetic monofilaments by at least EUR 0.20 per kilogram depending on the field of application and grade. Perlon-Monofil GmbH is one of five sections belonging...
Starlinger: Two new recycling lines for US-Multifilament producer
26.03.2012 - Recycling of plastic bottles, fiber waste and polyester fabrics Unifi, the US-based producer of multifilament polyester and nylon textured yarns has two Starlinger recycling lines in operation at the REPREVE Recycling Center in Yadkinville, North Carolina. The Starlinger recycling lines have been...
PCI Nylon: Positive Signals from the European Nylon Symposium 2012
26.03.2012 - At the European Nylon Symposium 2012 on February 27 and 28, 2012 in Frankfurt am Main, the organizers, the market research consultancy PCI Nylon of Bad Homburg, welcomed over 100 participants from the western and eastern European economic regions. Expert presentations were delivered on the market situation...
Colour Mixture for Polyurethane Foam
22.03.2012 - An Israeli SME has developed a colour mixture and its production process to colour polyurethane foam of various applications. Advantages over those on the market include that it is made of recyclable materials and allows cost-effective product, high concentration of pigment, but quick dispersion in...
Technology for gas-jet deposition of antibacterial metal-polymers consisting of silver nanoparticles imbedded into fluoropolymer matrix onto surfaces of various materials
22.03.2012 - A small company (Novosibirsk, Russia) developed, in team with an academic R&D institute, a technology for vacuum gas-jet deposition of metal composites based on silver nanoparticles imbedded into fluoropolymer film a matrix for making products with antibacterial coating. Coated materials have good...
Sailmaking technologies based on a unique layout of continuous fibres and oriented fibers vacuum membranes
19.03.2012 - A 30 years well established SME from north of Italy has developed innovative technologies for sailmaking based on a unique layout of continuous fibres and oriented fibers vacuum membranes. Furthermore they have a long established leadership in one design sails based on many years of tests and success...
EuPC: Plastics converters under raw materials cost pressure
16.03.2012 - Plastics converting companies have come under renewed pressure through increasing raw materials prices, says EuPC, the industry´s Brussels based body. ´There has been a sharp upswing in prices across the board for most polymers, commodity and engineering, and this is both seriously compromising processors...
BASF expands capacity for cyclohexane oxidation
15.03.2012 - BASF will increase its capacity for cyclohexane oxidation at its Antwerp Verbund site by about 50,000 tons per year. The total investment amounts to about €10 million. Cyclohexane oxidation products are important intermediates for caprolactam and adipic acid, starting materials for polyamide 6 (PA 6)...
New industrial procedure for characterization of elastomeric latex in real time
14.03.2012 - A Spanish public research organisation has developed a simple and economical procedure for complete characterization of latex manufacturing process, from quality control of raw material, following with pre-vulcanization up to post-vulcanization. Since this procedure is achieved in a low field MNR, a...
DSM: Price increase for PA6 and PA66 compounds
14.03.2012 - To offset escalating material costs, DSM Engineering Plastics is to increase prices on a global basis for its Akulon PA6 and PA66 compounds. Effective 1 April 2012, DSM will increase prices by € 200/t in Europe and Asia Pacific Regions. Effective March 19 DSM will increase prices by $0.10/lb in North...
Kuraray: Expand of TROSIFOL film production in Troisdorf
12.03.2012 - Kuraray is planning to increase production capacity for TROSIFOL PVB film at its site in Troisdorf, near Cologne in Germany. The company announced to invest nearly EUR 20 million in an additional production line, which will increase capacity enormously when it comes on stream at year-end 2013. Kuraray...
Styron: Price increases for polycarbonate and PC compounds & blends in Europe
12.03.2012 - Styron Europe GmbH and its affiliate companies in Europe recently announced price increases for all CALIBRE™ polycarbonate and EMERGE™ polycarbonate compound & blends products. Effective April 1, or as existing contract terms allow, the price for these products will rise by 250 Euro. This price increase...
1036 bis 1050 von 2.507 News « ‹6869707172›»
Current material prices
Average prices of offers
in the material exchange
PE-LD Bales [€/kg]
Latest entries in the buyers guide

SV Büro HvS-Havariekommissariat von Scherer
90522 Oberasbach, Germany

Plastium GmbH
78730 Lauterbach, Germany

INTERNORM Kunststofftechnik GmbH
49401 Damme, Germany

Helco Kunststoffverarbeitung Helmig GmbH & Co.KG
48369 Saerbeck, Germany

PlastoNord GmbH
27612 Loxstedt, Germany

» Enter the buyers guide

Latest Top-News