GMB#3840
(2017) EREMA INTAREMA 1714 TVEplus Complete Recycling Plant
Brand: Erema
Model: Intarema 1714
Year: 2017 and was started up for the first time in 2018.
Voltage 220V/380V 50Hz
Processed materials: PE, PP
Washed post-consumer film flakes, Production waste offline (producer), Industrial waste (recycler), Collection commercial waste, slightly printed, clean and dry, free of abrasive and corrosive contamination, as well as free of PVC, max. input moisture 4%, feed materials to be proportioned to an adequate shape for feeding.

Throughput: up to 1200 kg/h
dependent on bulk density, humidity, contamination, film thickness, pre proportion and filtration size.

1 Used Complete RECYCLING plant INTAREMA 1714 TVEplus, consisting of:

Pos. 1 1 Belt Conveyor - used
FB_10000_1200_SH
For feeding loose scrap material. Large Hopper in stainless design.
Incl. Dust and sound insulation tunnel
Automatic control via the EREMA main unit
Drive: AC motor with gearbox
Belt: 10000 x 1200 mm equipped with cleats
Design: Cranked (metal-free zone)

Pos. 2 1 Double Layer All Metal Detector - used
MT2_1200_DTR144H40
Unique EREMA design for recycling applications
Coil pass-through: 1440 x 400 mm
Detection: All-metal
Scanning sensitivity: Fe ≥ M6 nut, V2A ≥ M10 nut
Technology: Digital
Detection Alarm: Visual + Acoustic
Plus belt stop in case of detection

Pos. 3 1 Shredder-FB Level Control - used
EL_SYNC_EWZ_1
For synchronization of shredder and belt conveyor.
Consisting of:
Hopper at feeding area of conveyor belt
Frequency Converter for conveyor belt
Level meter for control of single shaft shredder

Pos. 4 1 Preparation for Powder Dosing Unit – Vol. - used
DBP_PPREP
Electrical and mechanical preparation to allow the use
of a dosing system, which will maybe installed later and
supplied by customer.

Pos. 5 1 INTAREMA® Process Combination - used
I_1714_TVEplus
For details view attached image

Pos. 6 1 Automatic Input Slider - used
INS_AUTOM_140_160
The automatically controlled input slider on the EREMA
Preconditioning Unit ensures:
-Constant extruder load
-Optimum operating status
-maximum throughput

Pos. 7 1 Preparation Customer Exhaust System - used
SAS_PREP_CUSTOMER_25
Preparation of the EREMA Preconditioning Unit to allow the use of a moisture and
dust reduction system supplied by customer.
Includes a suction ring and piping flange DM 200.

Pos. 8 1 Water System for Vacuum Pump - used
BWB_500_S
Unique EREMA design for saving fresh water.
Allows closed circuit of vacuum pump process water.
Screening system: 150 μm (100 mesh)
Water pump: 0,18kW (at 50 Hz)
Water tank: 420l stainless steel
Tubular heat exchanger: Stainless steel

Pos. 9 1 EREMA Laser Filter - used
For details view attached image

Pos. 10 1 Set Die Face Pelletising System - used
SET_HGU_244D_2010_W7_1000_M15
The EREMA die face pelletising system converts the polymer melt into high quality uniform and dry pellets.
Consisting of:

Pos. 10.1 1 Hot Die Face Pelletiser - used
HG_244D
Hot die face Cuter with Direct Drive technology.

Pos. 10.2 1 Pellet Dewatering Screen - used
GS_2010_1000
Enhanced process water separation unit with oversize drying
screen. Pellet and water contact surfaces made of stainless
steel or aluminium. Elongated basin with easy-lift filter screen
and new pump-suction filter.
Easy cleaning during production:
- One-hand removal & insert of filter screen
- Quick removal & insert of suction filter
- Inclined base for self-cleaning

Pos. 10.3 1 Water Pump Station - used
WPS_700
Consisting of:
Water Pump
Heat exchanger
Control valve

Pos. 10.4 1 Pellet Drying Centrifuge - used
For details view attached image

Pos. 11 1 Touch control panel - used
EL_SMART_PANEL_l
Highly modern ergonomic touch display with intelligent Smart Start
concept:
-Easy to operate thanks to logical, clearly structured and interactive display
- more user-friendliness – thanks to simplified handling, high degree of
Automation, including extensive control packages

Pos. 12 1 Standard Control System INTAREMA - used
EL_PACKACKE_INTAREMA
Start/stop control
Control for the various feeding units (such as conveyor belt and
roller intake) as a function of the load of the EREMA
preconditioning unit (PCU) – ensures controlled and stable
temperature pattern.
Automatic load detector
Automatic fine adjustment of the operating point for the most
energy-efficient performance of the EREMA preconditioning
unit (PCU).
Automatic feed supervision
Alarm signal and time-delayed automatic shutdown of the
system if material supply to the EREMA preconditioning unit
(PCU) is too low. Alarm signal if material supply to EREMA
preconditioning unit (PCU) is too high.
Automatic extruder speed control
Constant production even with fluctuations in feeding (e.g.
amount, temperature, moisture).
Pelletiser control via extruder speed
Consistent pellet form thanks to controlled adjustment of the
pelletiser to the current speed of the extruder.

Additional Information: Pellet transport and packaging station to be supplied by customer

Location: Austria
Price exworks as is / where is

[Description was hidden]