plasticker-News

Anzeige

2026-11-18, 06:00

KraussMaffei Extrusion: Single-stage process for PVC roofing membranes reduces energy consumption

The new PVC InlineMixing system for the cost-effective production of PVC roofing membranes. – (All images: KraussMaffei)
KraussMaffei Extrusion has developed a continuous process for manufacturing PVC roofing membranes that replaces separate dry blend preparation. In the process, known as “PVC-InlineMixing,” all solid and liquid formulation ingredients are fed directly into the extrusion process via gravimetric dosing systems. According to the company, energy consumption can be reduced by up to 75 percent compared with the conventional two-stage process. Actual savings depend on the formulation, equipment parameters and production site.

In conventional production, PVC powder, plasticizers, additives and fillers are first processed in batches in a heating/cooling mixer combination to produce a dry blend. After cooling and intermediate storage, the mixture is plasticized in a twin-screw extruder and processed into membranes. The single-stage process eliminates this separate premixing step, meaning the material only needs to be heated once.

Advert

This eliminates the need to invest in and maintain a heating/cooling mixer combination. According to KraussMaffei, space and staffing requirements are also reduced. Specific investment costs and payback periods are not provided. Formulation adjustments and color changes can be made via the integrated control system during operation. The preparation and intermediate storage of separate dry blend batches are eliminated.

The process was developed and tested with industrial roofing membrane formulations at the technology center in Laatzen. The trials used a “ZE 65 BluePower” co-rotating twin-screw extruder equipped with gravimetric loss-in-weight feeders for solids and several liquid dosing systems. The “ZE BluePower” series has a screw outer-to-inner diameter ratio of 1.65. According to the manufacturer, high torque and a large free volume enable the processing of a variety of formulations.

According to the company, trials with several formulations achieved the required degrees of PVC gelation and met industrial requirements for the membranes’ mechanical properties and weldability. The company does not provide quantitative test results.

The process is already being used in an industrial production line. According to KraussMaffei Extrusion, the reference installation achieves a total throughput of 1,800 kg/h using two extruders and two calender units. In addition to PVC, additives and fillers, the edge trim generated during production is continuously processed directly into finished membranes.

More information: www.kraussmaffei.com

KraussMaffei Technologies GmbH, Parsdorf


  back to news list  back to top


Latest Top-News
Latest entries in the buyers guide

Flux LTD
34788 İstanbul, Turkey

technotrans solutions GmbH
58540 Meinerzhagen, Germany

EUROPLAST GmbH
9772 Dellach, Austria

Ecoyadi-2 Sp. Z o.o.
54-215 Wroclaw, Poland

PolyTALENT GmbH
49393 Lohne, Germany

» Enter the buyers guide

Current material prices