Die Suche nach "Separation" in Technologie-Transfer brachte 22 Treffer.

1 bis 15 von 22 News « ‹12›»
zurück zur Suche
Looking for new cost-effective and scalable sorting processes which are able to sort a mix of plastics into separate types of plastic
20.04.2018 - A Dutch subsidiary of a multinational company is active in water and waste management. Their current waste separation process is not profitable to do additional sorting on the residual fraction of mixed plastics. To further improve their recycling achievements, the company is looking for new solutions...
Plastic foil separator for bulk waste sorting plants providing high sorting efficiency, separation quality and throughput rates
23.10.2015 - German company has developed a novel fully automated unit for the removal of plastic foils, films or other thin items with large surface areas from bulk waste streams prior to the sorting process. Thus it prevents blockages in the downstream sorting process and provides high separation efficiency, quality...
Optimized Density Separation with Float-Sink Tanks
23.04.2014 - A German SME is offering a new plastic separation technology with float-sink tanks. The company is specialized in manufacturing plastic and rubber machinery equipment. The separation using liquids in a float-sink tank is neither as expensive as separation technology nor as energy extensive as sorting....
Optimized Density Separation with Float-Sink Tanks
12.03.2014 - A German SME is offering a new plastic separation technology with float-sink tanks. The company is specialized in manufacturing plastic and rubber machinery equipment. The separation using liquids in a float-sink tank is neither as expensive as separation technologie nor as energy extensive as sorting....
Technology for improving selectivity of hollow fiber membranes based on polystyrene for separation of closeweight gases (carbon dioxide and nitrogen)
17.05.2013 - A Russian SME from St. Petersburg developed a technology for improving the selectivity of gas separation membranes based on polystyrene. This technology can increase the membrane selectivity in 1.5 times and increase the operating temperature up to 120C. Membranes with enhanced selectivity can be used...
Technology for simultaneous defibration, drying and removal of inclusions from fiber materials
10.05.2013 - An innovative SME from Perm (Russia) developed a technology and equipment for dry defibration of fibre materials with simultaneous drying and separation from extraneous inclusions. It allows defibrating without hydration such materials as paper for recycling, annual plants, etc., obtaining separately...
Innovative Technology for Plastic Recycling
24.04.2013 - An Israeli company is looking for a technology to recycle plastic / polymer materials. Ideally, the technology should result in homogeneous polymer material, which is highly adequate to content specifications. The technology should manage any kind of plastic scraps, i.e. postconsumer and agricultural...
Fully automated technology for the separation and recovery of plastic foils and other thin lightweight materials from recycling waste streams
28.02.2013 - A German university together with an engineering company has developed a fully automated technology for the separation of plastic foils and other thin two-dimensional material from recycling waste streams. Based on the principal of low and excess pressure it is realized by a unit of two rotating drums,...
New Technology of Depolymerization for Recycling of PET Bottles
23.01.2013 - A Czech research institute has developed low energy depolymerization of waste PET bottles using microwave energy. The products are polymer grade terephthalic acid and ethylene glycol. The process includes the following steps: - depolymerization - separation - purification - drying Separation of...
Preventing Liner Separation
15.11.2011 - A large US company is looking for proposals for technologies that will prevent polybutylene liners from separating from fiberglass shells in water heaters. They are interested in consulting, licensing, product acquisition, contract research, proof of concept leading to scale up to manufacturing, joint...
Innovative Technology for Plastic Recycling
11.09.2011 - An Israeli company is looking for a technology to recycle plastic / polymer materials. Ideally, the technology should result in homogeneous polymer material, which is highly adequate to content specifications. The technology should manage any kind of plastic scraps, i.e. postconsumer and agricultural...
New separation and recycling methods for demolition and construction waste
19.02.2011 - A Spanish construction waste management company is looking for new technologies to separate and recycle waste resulting from demolishing and building activities, especially different types of plastics, wood and textiles. Once these materials are separated, they would be reused or transformed into different...
High Temperature Polymer Technology
20.10.2010 - An Irish based materials science R&D company with an interest in chemical purification & separation products is seeking a supplier or technological solution to the production of high temperature stable polymers. The company is currently seeking a novel polymer that is stable at high temperatures (in...
New Technology of Depolymerization for Recycling of PET Bottles
23.09.2010 - A Czech research institute has developed low energy depolymerization of waste PET bottles using microwave energy. The products are polymer grade terephthalic acid and ethylene glycol. The process includes the following steps: - depolymerization - separation - purification - drying Separation of...
Materials / glass separation for windows & doors recycling
23.01.2010 - A French company specialized in recycling and second-life materials is willing to integrate technologies for the treatment of windows and doors: the aim is to remove the glass from the frames, in order to upgrade thereafter the matters separetly. Commercial agreement with technical assistance or license...
1 bis 15 von 22 News « ‹12›»
Aktuelle Geschäftskontakte
Wir suchen Handelsvertreter und Vertriebspartner zur Erweiterung unseres Netzwerks im Bereich recycelter Elastomere.
Top News / Meist gelesen
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

» Jetzt anmelden!

» Weiterempfehlen

Jetzt Kosten im Einkauf senken!
Neuware-Restmengen, Regranulate oder Mahlgüter für Ihre Produktion erhalten Sie in der Rohstoffbörse.

Neue und gebrauchte Maschinen & Anlagen finden Sie in der großen Maschinenbörse.

Kostenfreie Nutzung aller Börsen! Registrieren Sie sich jetzt!

Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PVC-w Mahlgut [€/kg]
Neue Fachbücher
Kunststoffe in der Medizintechnik

Das Fachbuch "Kunststoffe in der Medizintechnik - Vorschriften und Regularien, Produktrealisierung, Herstellungsprozesse, Qualifizierungs- und Validierungsstrategien" ist als Leitfaden für die Anwendung von Kunststoffen in Medizinprodukten konzipiert.