Die Suche nach "techno" in Technologie-Transfer brachte 915 Treffer.

526 bis 540 von 915 News « ‹3435363738›»
zurück zur Suche
Technology solutions for RF welding of pvc coated polyester woven cloth, without charring
05.11.2010 - A UK company is looking for a company that can provide or develop innovative solutions that will avoid the charring of pvc coated polyester woven cloth during the RF welding process. This could be in the form of a joint development or through the acquisition of an existing technology. (TECHNOLOGY...
Skateboard with special undercarriage
28.10.2010 - A Hungarian SME developed skateboard for the purpose of sport and hobby. Main advantage: because of its flexible undercarriage-support, it protects the ankle and knee joints of the sportsmen during jumping, while arriving on the floor. The technology can be used mainly for spending free-time and doing...
Manufacturer of rubber bellows for multi purpose trailer
21.10.2010 - A Swedish company has designed an inter-modal semitrailer for transport of both dry and liquid cargoes. The liquid is transported in six 5400 litre tanks - rubber bellows - which are folded when not used to leave room for transport of dry goods. The company is seeking a manufacturer of the rubber bellows....
Rubber housing for handheld radio frequency identification (RFID) reader
20.10.2010 - A small, innovative Dutch company in the ICT area is looking for a partner to develop and produce small size batches of an industrial housing for a handheld radio frequency identification (RFID) reader for use in animal identification. The technology should be available on the market. A partner is preferably...
High Temperature Polymer Technology
20.10.2010 - An Irish based materials science R&D company with an interest in chemical purification & separation products is seeking a supplier or technological solution to the production of high temperature stable polymers. The company is currently seeking a novel polymer that is stable at high temperatures (in...
Novel high pressure tank for gases consisting of fibre-reinforced plastic with flat or practically flat lids
20.10.2010 - A SME located in the Northeast of Germany has developed a novel high pressure tank for gases only consisting of fibre-reinforced plastic with flat or practically flat lids. These pressure tanks have a very low weight and a higher specific storage capacity compared with the usual gas tanks. The company...
Technology for thermoplastic processing of plastics and metal for LED diodes production
14.10.2010 - A Polish SMEs operating in the lighting industry is looking for a modern automatic technology for thermoplastic processing of plastics and metal. The company intends to expand production of a modern technological line for production of luminaires of LED diodes. The company is expecting industrial or...
Glass Reinforced Plastic Partners
13.10.2010 - A UK University seeks partners involved in industrial roofing and specifically industries using glass-reinforced polyester (GRP) for an FP7 funding application under the current Research for SMEs call. The project goal is to analyse the particular properties of these ground composites, in order to identify...
High-end smart material applications based on magnetic responsive rubbers
09.10.2010 - A Dutch SME is specialized in the development and production of Magnetic Smart Materials. The company offers expertise, co-engineering and Magneto Responsive Elastomers for the production of smart material applications. Main advantages are controllable properties regarding among others stiffness, vibration...
Transparent Conducting Graphene Coatings on Polymer Film Substrates
09.10.2010 - A large US company is looking for proposals for new graphene-based materials and/or processing methods able to deliver thin, optically transparent and highly conductive films on polymer film substrates. They are interested in licensing, product acquisition, contract research, proof of concept leading...
Manufacture of flexible signboard supporting columns, using fiber-reinforced composite method
30.09.2010 - A Hungarian SME developed a new composite production method suitable for manufacturing signboard supporting columns using rubber powder made from scrap tyre. The simple and efficient technology can be utilized for other applications as well. It is recommended for manufacturers and users in the field...
Technology for ultrasonic plastic welding is sought
30.09.2010 - Polish company is specialized in the design of miniature components and advanced solutions for hearing aids, microphones, loudspeakers, elecromechanical components for hearing aids, as well as, precise solutions for medicine purposes. The company is currently looking for the technology of ultrasonic...
Technology sought to apply long-lasting opaque colour coating on a black rubber surface
28.09.2010 - A company from Luxembourg producing polymer products is looking for knowledge or innovative technologies that allow to apply opaque color coatings onto black rubber surface that undergoes high deformation rates and cycles. Color and rubber must remain unaltered under mechanical, thermal and chemical...
New Technology of Depolymerization for Recycling of PET Bottles
23.09.2010 - A Czech research institute has developed low energy depolymerization of waste PET bottles using microwave energy. The products are polymer grade terephthalic acid and ethylene glycol. The process includes the following steps: - depolymerization - separation - purification - drying Separation of...
New intelligent material combining vinyle with nanoparticles of clay
21.09.2010 - The company, an international group with headquarters in Brussels, has succeeded to produce a nano dispersion of bentonite within a PVC (polyvinyl chloride) powder giving to the PVC unique properties to produce plastisols, coatings, films, mastics... The company looks for partners to set up technical...
526 bis 540 von 915 News « ‹3435363738›»
Aktuelle Geschäftskontakte
Industrievertretung sucht leistungsstarken Hersteller von Kunststoffspritzgussteilen
Top News / Meist gelesen
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

» Jetzt anmelden!

» Weiterempfehlen

Machen Sie Ihre Reste zu Geld!
Sie haben Neuware-Restmengen, Mahlgüter oder Produktionsabfälle?

Dann veräußern Sie diese kostenlos
in der Rohstoffbörse.

Für Ihre ausrangierten Maschinen und Anlagen finden Sie Abnehmer in der Maschinenbörse.
Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PC Mahlgut [€/kg]
Neue Fachbücher
IKT: Lehrbuch „Kunststofftechnik – Einführung und Grundlagen“ in neuer Auflage

Das Lehrbuch „Kunststofftechnik – Einführung und Grundlagen“ von Prof. Dr.-Ing. Christian Bonten, dem Leiter des Instituts für Kunststofftechnik an der Universität Stuttgart, IKT, ist in seiner vierten Auflage erschienen (Carl Hanser-Verlag, München, 557 Seiten, Flexibler Einband, 4c, 69,99 Euro).