Die Suche nach "techno" in Technologie-Transfer brachte 915 Treffer.

541 bis 555 von 915 News « ‹3536373839›»
zurück zur Suche
Wind turbine blades and cabins production technology
21.09.2010 - Croatian SME is interested in production of different parts of wind energy systems made of composite materials, especially wind turbine blades and cabins. SME has great experience in design and production of advanced composite material structures. In addition, they have sufficient facilities, human...
Novel Synthetic polymer for bone repair
15.09.2010 - A UK North West region University has developed a novel synthetic polymer for bone repair that has the important advantage that it mimics the structure of bone. The University is looking for an industrial partner to further develope this poymer and bring to market under a licence agreement. (TECHNOLOGY...
Long fibre reinforced bio based thermoset composite materials
11.09.2010 - A Dutch company is specialized in the development and production of products based on long fibre reinforced bio based thermoset composite materials. The company pioneered the use of these materials in the Netherlands in the last 15 years and created an extensive library of material combinations and...
Sustainable Materials for Children’s and Infants’ Consumer Products
09.09.2010 - A large US company is looking for partners developing or producing resins, polymers and fibers that are more sustainably produced. Of interest are both materials that can be sampled immediately, as well as responses that describe development or commercial activities to create one or more of the target...
Method of making carbon brake disc preforms faster and with minimal waste
08.09.2010 - A UK specialist textile company has developed a method for making carbon performs for brake discs without significant cutting waste, and the filling of moulds significantly faster. The company is open to discuss the collaboration type. (TECHNOLOGY OFFER, ref.:10 GB 43O3 3IEY) Link to more detailed...
PS – FP7 Clinical and mechanical trials of new composite hip joint endoprosthesis
08.09.2010 - A Polish SME active in plastics manufacturing sector invented a new model of hip joint prosthesis which surface is covered with PE (polyethylene). The company is looking for research partners among RTD entities to perform endurance research (static and dynamic) and hospitals specialized in regenerative...
High-pressure Resin Transfer Moulding technology for high-throughput production of carbon fibre reinforced polymer parts
07.09.2010 - Two German companies and a research organisation jointly develop advanced high-pressure resin transfer moulding (RTM) production technology for use in e.g. automotive industry, where high throughput is essential. The technology allows automated large scale production of carbon fibre reinforced polymer...
Package of innovative technologies for tool management in the plastics industry
07.09.2010 - A German SME is developing a technology package for tool management in the plastics industry. The technologies provide comprehensive information about the location and condition of tools as well as the production process, minimising machine shutdown times caused by the loss or breakage of tools. The...
Machines for cutting foamed polystyrene (horizontal/vertical)
01.09.2010 - Polish company developed a machine for cutting foamed polystyrene boards. The machine is made of light material and is portable. It can be used in various conditions and is easy to operate. The company is looking for partners interested in the offered technology, i.e. partners for license or commercial...
Atmospheric Cold Plasma Technology to Functionalize Thermoplastic Materials for Improved Adhesion with Dienic Rubbers
01.09.2010 - A large US company is looking for proposals for the functionalization of thermoplastic materials by atmospheric cold plasma so that they can be permanently adhered to dienic rubbers without using adhesive systems. They are interested in licensing, product acquisition, contract research, proof of concept...
Composite Preforming Technology
27.08.2010 - A Dutch spin off company of a university of technology has developed an automated manufacturing process to produce preforms for high end composite products. The expected improvements, when compared to traditional lamination techniques, include a higher product quality, better reproducibility, faster...
Kneading, Extruding, and Rolling Technologies for Rubber Sheets
25.08.2010 - A large US company is looking for proposals for kneading technology that evenly mixes carbon filler into rubber materials and continuously forms the compound into precise sheets. They are interested in equipment sale and technology licensing. (TECHNOLOGY REQUEST, ref.:10 US 87GA 3ICY) Link to...
Seeking Olefin Copolymer Supply
25.08.2010 - A large US company is looking for immediate supply of a thermoplastic olefin copolymer. The company currently uses a low Tg low melt index copolymer in a high modulus laminate film application. They seek an alternate polymer type or source. They are interested in immediate proof of concept, leading...
New applications for biodegradable material used in golf tees
24.08.2010 - A Swedish company has developed a biodegradable material made of a biopolymer filled with chalk and talc and additives. The material is resistant in air. The biodegradation begins once in contact with soil moisture, sunlight and heat. Carbon dioxide and water are formed when the material is degraded....
New food container with vacuum sealing system
21.08.2010 - A Spanish company working in the food transportation sector has designed and patented a container with an innovative vacuum system, helping the food preservation while being transported. The vacuum sealing system is manually operated, using a double lid mechanism that extracts the air from inside until...
541 bis 555 von 915 News « ‹3536373839›»
Aktuelle Geschäftskontakte
Industrievertretung sucht leistungsstarken Hersteller von Kunststoffspritzgussteilen
Top News / Meist gelesen
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

» Jetzt anmelden!

» Weiterempfehlen

Machen Sie Ihre Reste zu Geld!
Sie haben Neuware-Restmengen, Mahlgüter oder Produktionsabfälle?

Dann veräußern Sie diese kostenlos
in der Rohstoffbörse.

Für Ihre ausrangierten Maschinen und Anlagen finden Sie Abnehmer in der Maschinenbörse.
Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PVC-w Mahlgut [€/kg]
Neue Fachbücher
IKT: Lehrbuch „Kunststofftechnik – Einführung und Grundlagen“ in neuer Auflage

Das Lehrbuch „Kunststofftechnik – Einführung und Grundlagen“ von Prof. Dr.-Ing. Christian Bonten, dem Leiter des Instituts für Kunststofftechnik an der Universität Stuttgart, IKT, ist in seiner vierten Auflage erschienen (Carl Hanser-Verlag, München, 557 Seiten, Flexibler Einband, 4c, 69,99 Euro).