Die Suche nach "techno" in Technologie-Transfer brachte 915 Treffer.

76 bis 90 von 915 News « ‹45678›»
zurück zur Suche
Innovative joining and assembly process for the manufacturing of long-term tight polymer-metal-hybrids
16.01.2015 - The chair of polymer technology at a German university is looking for project partners in order to submit a proposal for the H2020-FoF12-Call "Industrial technologies for advanced joining and assembly processes for multi-materials”. Aim of the project is the development of an innovative joining and...
Technology sought for the production of a clear biodegradable or recyclable film suitable for coated laminate and related conversions
13.01.2015 - A UK based SME dealing with a bulk global manufacturing accessory seeks innovative ´green´ technologies, for the process and production of rolls of a clear film, with the suppleness of PVC, suitable for coated laminate production and other conversions. Industry or research organisations developing materials...
Innovation technology and equipment for UV-LED curing of polyester resins composite materials
18.12.2014 - A small innovative company from Ulyanovsk, Russia, developed an UV-LED radiator for curing of composite materials. The radiator is to be applied to manufacture various products for many fields of industry. The authors are looking for partners for technical cooperation and commercial agreement with technical...
Technology for integrated plastics/rubber recycling into useful products
18.12.2014 - A Ukrainian university developed an environmentally friendly technology for integrated plastics/rubber recycling into useful products (soles, accessories/garnitures etc) using a set of equipment for grinding, moulding and mechanical polishing. It can be used in mechanical engineering and chemical/light...
New technique to remove hazardous substances in waste packaging by supercritical carbon dioxide in the recycling process
18.12.2014 - A Spanish technology centre is developing a new technique for eliminating hazardous substances from waste polyethylene (PE) packaging to be used for solvents or phytosanitary products. This technique uses a technology that applies supercritical carbon dioxide (sc-CO2) in the extrusion phase of the plastic...
Easy-to-clean sol-gel based coatings
10.12.2014 - A French SME specialized in polymer and sol-gel nanotechnologies has developed easy-to-clean coatings based on sol-gel chemistry. These customizable coatings improve the cleanability of various kind of substrates even plastic ones thanks to a low temperature curing. They can also be used for optical...
Food packaging technology and machines for welding soak pads to plastics trays for food products
03.12.2014 - A Dutch company, active in developing, engineering and building machines for food packing lines, is looking for new partners in packaging food products. They have a special knowledge of ultrasonic welding of soak pads to plastic trays for food packaging industry. Application of this technology lies...
Fiber reinforced polymer lock gates
26.11.2014 - A Dutch company offers fibre-reinforced lock gate technology to construct strong, lightweight and durable sluicegates. This is a proven technology, with significant advantages to steel, concrete and timber in lock gates, flood gates and other marine structures. The company is looking for a cooperation...
Abrasion and scratch resistance sol gel coatings for plastic, metal and glass substrates
26.11.2014 - A French SME specialized in sol gel based coatings has developed a range of sol gel coating materials to implement scratch resistant /abrasion resistant coatings. These coatings include various sol gel compositions allowing the application at low temperature on plastics. Moreover, this customizable...
Hot melt sealing compounds sought for shrink sleeves in gas/water pipelines
14.11.2014 - An Italian producer of hot melt sealants and adhesives is looking for a technological partner with adequate lamination equipment for combining the hot dispensed sealing system to shrinkable thermoplastic films. The company is looking for a partner with an adequate know-how to be confident with an adequate...
Biocompatible and non-toxic technology for creating antibacterial plastic
24.10.2014 - A Dutch SME developed an innovative technology to create antibacterial plastics without using heavy metals, biocides, chemicals, nano-materials or other harmful substances. The technology is incorporated in a carrier that is added to the virgin thermoplastic material. The company is looking for partners...
Technology sought for the production of a clear bio based, recyclable or sustainably manufactured film suitable for coated laminate and related conversions
03.10.2014 - A UK based SME dealing with a bulk global manufacturing accessory seeks innovative ´green´ technologies, for the process and production of rolls of a bio based or sustainably manufactured clear film. The film must have the suppleness of polyvinyl chloride (PVC) and be suitable for coated laminate production...
Advanced abrasive technology solutions sought for high value metal working and carbon composite applications
03.10.2014 - In the UK there is a clear commercial opportunity for the introduction of superior products using advanced abrasive technology for speciality metal working and carbon composite fabrication applications. A UK SME that is an established supplier of welding and abrasive products to industrial users seeks...
A Swedish company offers a new technological breakthrough for compressing styrofoam
12.09.2014 - A Swedish engineering company is on the verge of developing a new method for compressing expanded polystyrene foam (typically used as cushioning material in the packaging industry) which could allow for more efficient recycling and handling. The company is now looking for a partner that is interested...
One-stop lightweight engineering solutions for partners from Greece and Cyprus
10.09.2014 - An institute from Germany focuses on lightweight engineering and polymer technology and has large R&D expertise. The institution develops fibre-reinforced plastic composites usable for electric mobility, aeronautics and space applications, and in other contexts that are related to sustainable reduction...
76 bis 90 von 915 News « ‹45678›»
Aktuelle Geschäftskontakte
Industrievertretung sucht leistungsstarken Hersteller von Kunststoffspritzgussteilen
Top News / Meist gelesen
plasticker Newsletter
Wir informieren Sie schnell, umfassend und kostenlos über das, was in der Branche passiert.

» Jetzt anmelden!

» Weiterempfehlen

Jetzt Kosten im Einkauf senken!
Neuware-Restmengen, Regranulate oder Mahlgüter für Ihre Produktion erhalten Sie in der Rohstoffbörse.

Neue und gebrauchte Maschinen & Anlagen finden Sie in der großen Maschinenbörse.

Kostenfreie Nutzung aller Börsen! Registrieren Sie sich jetzt!

Neue Fachbücher
Simulationsgestützte Bestimmung und Optimierung der Mischgüte in der Einschneckenextrusion

Die Wirtschaftlichkeit einer Extrusionsanlage ist insbesondere dann gegeben, wenn ein hoher Massedurchsatz bei ausreichend hoher Qualität der Kunststoffschmelze gewährleistet ist, die direkt mit der resultierenden Qualität des Endproduktes sowie der Ausschussrate der Produktion korreliert.

Aktuelle Rohstoffpreise
Preise von Angeboten
in der Rohstoffbörse
PP Ballenware [€/kg]